Sanitation, heating, air-conditioning (PDF / 6,4 MB - BTI
Sanitation, heating, air-conditioning (PDF / 6,4 MB - BTI
Sanitation, heating, air-conditioning (PDF / 6,4 MB - BTI
- TAGS
- sanitation
- heating
- en.bti.de
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
www.<strong>BTI</strong>-GROUP.COM<br />
07<br />
A<br />
isovlies Plus DN Miniquick Ku<br />
Self-adhesive, foil-coated<br />
�����<br />
isovlies Plus DN<br />
Specially for <strong>air</strong> and structure-borne insulation and for anti-sweat insulation at drainpipes. Thickness of<br />
insulation layer: 6 mm<br />
g with an insulation thickness of just 6 mm, better<br />
noise-insulation values are achieved than with<br />
normal<br />
9 mm wastewater insulation materials<br />
Noise-insulation:<br />
Plastic tube (HT): 21 dB(A) *<br />
For wrapping around branches and fittings after pipe assembly<br />
g Can be pulled over sockets and bows of HT pipes<br />
Due to its flexibility and dia. oversize, can be pulled<br />
over sockets and bows; in the area around the bow,<br />
no lavish and therefore expensive pipe fittings are<br />
required; additional junctions at the socket are<br />
avoided<br />
* Remaining noise values are disconnected from the sound bridge<br />
compare test certificate No. P-BA 237-1998(k) Fraunhofer Institute for construction physics<br />
Item Unit Designation Hose SML pipes HT pipes<br />
number m inner dia. Nominal w Outer dia. Nominal w<br />
mm DN mm DN<br />
004897 10/100 isovlies Plus DN 50 ≥ 64 50 58 50<br />
004898 10/100 isovlies Plus DN 70 ≥ 89 70 78 70<br />
006937 10/100 isovlies Plus DN 80 ≥ 108 80 83 80/90<br />
004899 10/100 isovlies Plus DN 100 ≥ 127 100 110 100<br />
004900 10/100 isovlies Plus DN 125 ≥ 146 125 135 125<br />
07-322 A/P/T 07322<br />
isovlies Plus T-X<br />
X-shaped insulation cutting for structure-borne insulation of wastewater feed offs<br />
g Made of tear-free synthetic polyester matting<br />
g Covered with a damp-impermeable PE outer skin<br />
g Safe insulation even in difficult installation<br />
situations<br />
g Easy and fast assembly<br />
Self-adhesive closing caps<br />
g 80 % Time saving in contrast to normal wound<br />
insulation<br />
g Avoids noise bridges<br />
Safe overlapping<br />
g 6 Different shapes for 18 types of feed off<br />
From DN 50 to DN 100<br />
g Each for feed off angles of 45°, 67° and 87°<br />
isovlies Plus DN insulation strips Miniquick<br />
isovlies Plus T-X (6 mm)<br />
Item Unit Feed off<br />
number Pieces combination<br />
004854 7/28 50/ 50<br />
004855 7/28 70/ 50<br />
004856 7/28 70/ 70<br />
004857 7/28 100/ 50<br />
004858 7/28 100/ 70<br />
004859 7/28 100/100<br />
07-323 A/P 07323<br />
Item Unit Designation Material thickn. Roll length Strip width<br />
number m mm m mm<br />
005868 90/450 isovlies Plus DN Miniquick 70/360 Ku 4 3.6 70<br />
434 07-324 A/P 07324<br />
1006
Change language