Sanitation, heating, air-conditioning (PDF / 6,4 MB - BTI
Sanitation, heating, air-conditioning (PDF / 6,4 MB - BTI
Sanitation, heating, air-conditioning (PDF / 6,4 MB - BTI
- TAGS
- sanitation
- heating
- en.bti.de
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
www.<strong>BTI</strong>-GROUP.COM<br />
07<br />
A<br />
�����<br />
isovlies<br />
PE-coated polyester mat, welded into insulation tubes for insulation of <strong>heating</strong> lines without requirements in<br />
accordance to EnEV or cold-water lines in accordance to DIN 1988 (thickness of insulation layer 4 mm)<br />
g Fast, light and easy to pull over<br />
2 – 3 mm larger diameter than the pipe<br />
g High rate of safety against damage, even when<br />
installed under the plaster<br />
Outer skin resistant to trampling and tear-proof<br />
g Contains no materials aggressive to metal<br />
Tested: FMPA V/96 1090 Vo/Gö<br />
g Excellent protection against condensation<br />
Damp-impermeable PE foil outer skin<br />
g Particularly good noise-insulation and reduction<br />
of flow and cracking noises<br />
Tested 4 mm synthetic mat<br />
welding strip:<br />
g No overlapping<br />
Flush connection of the insulation mat<br />
g No vapor diffusion bridges<br />
completely welded with PE outer skin<br />
Synthetic insulation mat:<br />
g without chemical irritants<br />
g No materials aggressive to metal<br />
Test certificate from the Forschungs- und<br />
Materialprüfanstalt Baden-Württemberg, Germany<br />
PE foil outer skin (silver):<br />
g Clean appearance<br />
g Extremely resistant to trampling and tear-proof<br />
complete connection with the synthetic mat<br />
isovlies insulation tube<br />
Technical data<br />
Material: PE-coated polyester mat<br />
Temperature resistance: -70 °c to +115 °c<br />
Reaction to fire B2 normal flammability<br />
acc. to DIN 4102 FMPA 16-78226<br />
Insulation thickness 4 mm<br />
Roll length 25 m<br />
Noise tested acc. to DIN 4109<br />
Noise-insulation effect Fraunhofer Institute for<br />
Test certificate Building Physics IBP GS 198/90<br />
Thermal conductance* Test certificate<br />
Tested acc. to DIN 52613 of the Fraunhofer Institute for<br />
(pipe behavior) Building Physics IBP P2-10/1990<br />
* Hose at 10 °c mean temperature 0.0397 W/mK<br />
* Strips at 10 °c mean temperature 0.0394 W/mK<br />
* Hose at 40 °c mean temperature 0.0416 W/mK<br />
* Strips at 40 °c mean temperature 0.0419 W/mK<br />
Please request<br />
proof certificates!<br />
For insulation of cold drinking water lines acc. to TRwI (DIN 1988) for the 4 mm insulation range or for<br />
insulation of heat lines without requirements acc to EnEV; insulation layer thickness: 4 mm<br />
Item Unit Designation Steel pipe FE Copper pipe Cu<br />
number m Inch Rated Outer Rated Outer<br />
width dia. width dia.<br />
DN mm DN mm<br />
266558 25/100/500 isovlies Ku 1 /4" 1 /4 8 13.5 10/– 12/15<br />
266507 25/100/400 isovlies Ku 3 /8" 3 /8 10 17.2 15 18<br />
266485 25/100/400 isovlies Ku 1 /2" 1 /2 15 21.3 20 22<br />
266493 25/100/300 isovlies Ku 3 /4" 3 /4 20 26.9 25 28<br />
266515 25/100/250 isovlies Ku 1" 1 25 33.7 32 35<br />
266531 25/100/200 isovlies Ku 1 1 /4" 1 1 /4 32 42.4 40 42<br />
07-32 A/P 0732<br />
430 1006
Change language