Sanitation, heating, air-conditioning (PDF / 6,4 MB - BTI

1006
�����
Standard connection adapter
Fits on standard pipe clamps with tapped thread
The standard connection adapter can be screwed onto the welded tapped thread and can be delivered with the inner
thread listed below. This provides you with a range of connection possibilities.
weight Fits on Unit Item
Connection IG kg/piece layered nut Pieces number
M 16 0.09 M 8/M10 1 016146
Socket1/2” 0.07 M 8/M10 1 016147
M 16 0.09 M10/M12 1 016148
Socket1/2” 0.08 M10/M12 1 016149
Standard pipe clamp MS, heavy
In two parts, galvanized with noise-insulation profile
Design/Assembly:
g Fire-protection tested by MPA Stuttgart, Otto-Graf-Institut; F30, F60, F90
g Pipe clamps with locking screws
g with connection M8/M10 round dia. 17 mm, M10/M12 round dia. 18 mm,
M16 hex a/f 24, 1/2” round socket dia. 26.5 mm
g Suitable for simple fixing using a connecting thread or
Technical data:
g Material S235JR
g Galvanized acc. to DIN 50961
g Noise protection for DIN 4109
g Locking screws acc. to DIN 933, captive pendulum nut
g Noise-insulation profile:
Material: Rubber EPDM/SBR SILICONE
Temperature resistance - 40 °c to +120 °c - 60 °c to +250 °c
material thickness 6 mm 6 mm
Building material class acc. to DIN 4102 B2 B2
1) Load details determined at a temperature load of up to 250 °c
2) Limited by optical considerations
double fixing using boreholes at the clamp shackles
NOISE-
PROTECTION
acc. to DIN 4109
Dimension F max. at 1) Live load 1) Live load 2)
range material yield strength upright assembly suspended assembly
mm kN kN kN
22 – 57 12,375 8.25 2.50
58 – 117 14,580 9.90 2.90
121 – 275 23,100 15.40 3.40
Max. permissible load for fire resistance
Pipe
clamping
range
MLAR/LAR/
RbLei1) F30
“F. resist.“ 30
[kN]
Perm. load
[mm]
“F. resist.“ 60
[kN]
64-89 3.40 2.50 1.30
108-168 3.40 2.50 1.40
177-368 3.40 2.50 1.60
1) In some German states introduced with an altered name and partially
different details from the building authorities as the line system regulation
“F. resist.“ 90
[kN]
Fire tested
Building
Material class
B2
„Normal flammability“
acc. to DIN 4102
with noise-insulation insert
Connection: Tapped thread M8/M10 EPDM/SBR
Clamping range Material: Screw H (min-max) A B S D weight Unit Item
mm inch mm plugs mm mm mm mm mm kg/piece Pieces number
20 – 25 1/2 25 x 3.0 M 8 x 30 56 – 61 30 103 79 10.5 0.254 25 016057
26 – 30 3/4 25 x 3.0 M 8 x 30 65 – 69 30 111 87 10.5 0.267 25 016058
31 – 36 1 25 x 3.0 M 8 x 30 70 – 75 30 116 92 10.5 0.280 25 016059
38 – 45 1 1/4 25 x 3.0 M 8 x 30 77 – 84 30 124 100 10.5 0.301 25 016060
47 – 51 1 1/2 25 x 3.0 M 8 x 30 86 – 90 30 132 108 10.5 0.315 25 016064
53 – 57 25 x 3.0 M 8 x 30 92 – 96 30 138 114 10.5 0.336 25 016065
58 – 64 2 30 x 3.0 M 8 x 30 97 – 103 30 144 119 10.5 0.393 25 016066
www.BTI-GROUP.COM
07
C
497