Sanitation, heating, air-conditioning (PDF / 6,4 MB - BTI

www.BTI-GROUP.COM
07
C
�����
Stex 45 quick assembly system
The quick-assembly system for medium to heavy assemblies
1 2
3 4
The new BTI quick‑assembly system with the tried‑and‑tested Stex functions – now even for medium and heavy loads.
Your advantage: Stex 45, the innovative connection element for all BTI assembly rails from a profile width of 45 mm.
Stex 45 thread board GP
Alternately with M8, M10 or M12 connection
Your advantages:
g Instead of a toothed board and locking board, you
only need the one-part Stex 45 thread plate GP
g Insert the GP thread plate in the profile rail, rotate
by 45°, turn in the threaded pin, place on the locking
nut and screw on the pipe clamp – ready!
g Positive fit in the profile rail due to the toothed
board
Stex 45 threaded bolt GB
Alternately with M8 or M10 threaded pin
Your advantages:
g Instead of a toothed board, threaded pin and
locking board, you only need the one-part Stex 45
threaded bolt
g Insert the threaded bolt in the profile rail, rotate
by 45°, place on the locking nut and screw on the
pipe clamp – ready!
Stex 45 assembly bolts MTB
For assembly of rail constructions
Your advantages:
g Insert the assembly bolt, turn 45°, position, place
on the component and lock the nut – ready!
g No complicated insertion of toothed bolts or
toothed boards
Stex 45 assembly board MP
For assembly of rail constructions or attachments
Your advantages:
g Insert the assembly bolt, turn 45°, position, place
on the component and turn in the screw – ready!
g No complicated insertion of toothed bolts or
toothed boards
1. Insert Stex 45
2. Turn the Stex 45
3. Position the Stex 45
4. Stex 45 can be easily disassembled and
reinserted
g After turning in, the Stex thread board anchors
itself automatically with a positive fit in the teething
of the profile rail (audible by the “click” sound
when pushing into the profile rail)
g After turning in, the Stex 45 thread board can be
aligned by moving it in the profile rail
g Threaded pins or threaded rods can be easily
turned in
g Using the threaded bolt, differences in length and
height of up to 30 mm can be continuously compensated
for without sawing or using tools
g Distances of up to 130 mm can be achieved by using
various bolt lengths
g Holds independently in the BTI profile rail
g Simplifies assembly of connection components in
rail constructions
g Holds independently in the BTI profile rail
g Simplifies the assembly of attachments such as
sliding elements or connection components in rail
constructions
506 1006