Sanitation, heating, air-conditioning (PDF / 6,4 MB - BTI
Sanitation, heating, air-conditioning (PDF / 6,4 MB - BTI
Sanitation, heating, air-conditioning (PDF / 6,4 MB - BTI
- TAGS
- sanitation
- heating
- en.bti.de
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1006<br />
�����<br />
Stex universal angle mount set SX 35<br />
Design/Assembly:<br />
g The angle mounts you can use for almost all<br />
corner connections<br />
g Secure holding mechanism: Insert the Stex angle<br />
mount, turn it and it sits tight!<br />
g For installing traverses<br />
g For connection to normal profile rails<br />
g Stex universal angle mount set with rotatable Stex<br />
board for subsequent installation of traverses<br />
Designation weight Unit Item<br />
kg/piece Pieces number<br />
Stex universal angle mount set SX 35 0.152 25 016211<br />
Stex angle mount SX 35<br />
Design/Assembly:<br />
g Secure holding mechanism: Insert the Stex angle<br />
mount, turn it and it sits tight!<br />
g For simple corner connections<br />
g Pre-assembled screws<br />
Designation weight Unit Item<br />
kg/piece Pieces number<br />
Stex angle mount SX 35 0.125 25 016210<br />
Saddle flange SX 35/35<br />
Design/Assembly:<br />
g For floor and ceiling assembly<br />
g For wall assemblies with support on both sides<br />
g Suitable for Stex assembly rail SX 35/35<br />
Technical data:<br />
g Material S235JR<br />
g Galvanized<br />
g with hex screw M8 x 35,<br />
Strength class 8.8 and M8 nut<br />
Assembly instructions:<br />
We recommend using u-shims to assemble the Stex support<br />
g Height-adjustment of threaded rods or pins<br />
possible<br />
g The threaded rods or threaded pins must be<br />
locked by a nut<br />
Technical data:<br />
g Material S235JR<br />
g Galvanized<br />
g Screws: M 8 x 16, DIN 933 strength class 8.8<br />
Technical data:<br />
g Material S235JR<br />
g Galvanized<br />
g Screws: M8 x 16, DIN 933 strength class 8.8<br />
Designation Perm. pull weight Unit Item<br />
Load F kg/piece Pieces number<br />
kN<br />
Saddle flange SX 35/35 2 0.132 10 016192<br />
www.<strong>BTI</strong>-GROUP.COM<br />
07<br />
C<br />
503