Sanitation, heating, air-conditioning (PDF / 6,4 MB - BTI

www.BTI-GROUP.COM
07
A
Self-adhesive overlap
always point downwards
�����
isowoll
For heat insulation of heat distribution and drinking water systems according to EnEV
isowoll is a mineral wool insulation material covered
with a reinforced mesh of tear-resistant aluminum
sandwich foil with self-adhesive overlap. isowoll is cut
open at one side and sawed in for easier assembly at
the inner wall.
g Heat insulating
g Resistant to crushing under pressure and
dimensionally stable
g Fast and easy to lay
g Effective vapor barrier
g Hydrophobic
g Produced in AS quality
g Suitable for solar systems
Processing instructions:
The underground must be dry, clean and fat-free when
gluing the longitudinal and round joints. To improve the
sticking power, the self-adhesive longitudinal overlap
must be firmly applied to the underground. Acc. to
DIN 4140, the pipe layers must be secured with at least
6 windings of splicing wire for each running meter
isowoll 50-A2, 50 % EnEV isowoll 100-A2, 100 % EnEV
Item Unit Ins. thickn./ Copper pipes/CU Steel pipes/FE
number m Pipe outer Outer dia. Rated Inch Rated Outer dia.
dia. mm mm width DN width DN mm
005586 42 20/15 15 – 1/4 8 13.5
005587 42 20/18 18 15 3/8 10 17.2
005588 36 20/22 22 20 1/2 15 21.3
005589 30 20/28 28 25 3/4 20 26.9
005590 25 20/35 35 32 1 25 33.7
005592 16 25/42 42 40 11 /4 32 42.4
005593 16 25/48 – – 11 /2 40 48.3
005594 9 30/60 54 40 2 50 60.3
07-414 A/P/T 07414
Technical data
Material mineral wool covered with reinforced
mesh aluminum sandwich foil
Temperature at wool side up to +250 °c
resistance at aluminum side up to +80 °c
Melting point > +1,000 °c
Reaction to fire (DIN 4102) A2 non-flammable
Tube length 1 m
Thermal conductance l R = 0.040 W/mK
isowoll 50-A2/roll goods acc. to DIN 52613
Thermal conductance l R = 0.035 W/mK
isowoll 100-A2 acc. to DIN 52613
AS quality AGI Q 135
Water-repellency ≤ 10 Vol. % water absorption
acc. to AGI Q 136
Please request
proof certificates!
Item Unit Ins. thickn./ Copper pipes/CU Steel pipes/FE
number m Pipe outer Outer dia. Rated Inch Rated Outer dia.
dia. mm mm width DN width DN mm
003932 48 20/ 15 15 – 1 /4 8 13.5
001731 42 20/ 18 18 15 3 /8 10 17.2
001732 36 20/ 22 22 20 1 /2 15 21.3
001733 30 20/ 28 – – 3 /4 20 26.9
001734 20 30/ 28 28 25 – – –
001735 16 30/ 35 35 32 1 25 33.7
001736 12 30/ 42 – – 11 /4 32 42.4
001737 9 40/ 42 42 40 – – –
001738 9 40/ 48 – – 11 /2 40 48.3
007671 5 50/ 54 54 50 – – –
001740 5 50/ 60 * – – 2 50 60.3
014992 4 60/ 60 – – 2 50 60.3
007742 3 70/ 76 – – 21 /2 65 76.1
007743 3 80/ 89 86,9 – 3 80 88.9
007770 3 30/133 * – – – – –
07-415 * Does not conform to the 100% range in according to EnEV A/07446
isowoll 035 A2
Item Unit Ins. thickn./ Copper pipes/CU Steel pipes/FE
number m Pipe outer Outer dia. Rated Inch Rated Outer dia.
dia. mm mm width DN width DN mm
007760 10 30/54 54 50 – – –
007765 7 30/76 – – 21 /2 65 76.1
007766 6 30/89 86,9 – 3 80 88.9
07-415 A 07
448 1006