You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Listening to your system 05<br />
Setting the Audio options<br />
There are a number of additional sound<br />
settings you can make using the AUDIO<br />
PARAMETER menu. The defaults, if not stated,<br />
are listed in bold.<br />
Important<br />
•The AUDIO PARAMETER menu is not<br />
available with MULTI IN input (see<br />
Selecting the multichannel analog inputs<br />
on page 29).<br />
• Note that if a setting doesn’t appear in the<br />
AUDIO PARAMETER menu, it is<br />
unavailable due to the current source,<br />
settings and status of the receiver.<br />
RECEIVER<br />
RECEIVER<br />
BD<br />
INPUT SELECT<br />
ZONE 2<br />
ON/OFF<br />
TV<br />
INPUT<br />
DVR<br />
CD CD-R TUNER<br />
SOURCE<br />
TV CONTROL<br />
CH<br />
AUDIO<br />
PARAMETER<br />
ENTER<br />
RETURN<br />
1 Press RECEIVER on the remote control,<br />
then press AUDIO PARAMETER button.<br />
2 Use / to select the setting you want<br />
to adjust.<br />
Depending on the current status/mode of the<br />
receiver, certain options may not be able to be<br />
selected. Check the table below for notes on<br />
this.<br />
3 Use / to set it as necessary.<br />
See the table below for the options available<br />
for each setting.<br />
SETUP<br />
TUNER EDIT<br />
TOOLS<br />
MASTER<br />
VOLUME<br />
4 Press RETURN to confirm and exit the<br />
menu.<br />
TOP<br />
MENU<br />
HOME<br />
MENU<br />
PRESET<br />
TUNE<br />
TUNE<br />
PRESET<br />
MENU<br />
BAND<br />
English Français Español<br />
Setting What it does Option(s)<br />
S.DELAY<br />
(Sound Delay)<br />
MIDNIGHT a<br />
LOUDNESS a<br />
S.RTV b<br />
(Sound Retriever)<br />
DUAL MONO c<br />
Some monitors have a slight delay when showing video, so<br />
the soundtrack will be slightly out of sync with the picture.<br />
By adding a bit of delay, you can adjust the sound to match<br />
the presentation of the video.<br />
Allows you to hear effective surround sound of movies at<br />
low volumes.<br />
Used to get good bass and treble from music sources at<br />
low volumes.<br />
When audio data is removed during the compression<br />
process, sound quality often suffers from an uneven sound<br />
image. The Sound Retriever feature employs new DSP<br />
technology that helps bring CD quality sound back to<br />
compressed 2-channel audio by restoring sound pressure<br />
and smoothing jagged artifacts left over after<br />
compression.<br />
Specifies how dual mono encoded Dolby Digital<br />
soundtracks should be played.<br />
0.0 to 9.0 (frames)<br />
1 second = 30 frames<br />
(NTSC)<br />
Default: 0.0<br />
M/L OFF<br />
MIDNIGHT<br />
LOUDNESS<br />
OFF<br />
ON<br />
CH1 –<br />
Channel 1 is heard only<br />
CH2 –<br />
Channel 2 is heard only<br />
CH1 CH2 –<br />
Both channels heard<br />
from front speakers<br />
27<br />
En
Change language