MILLER DURAHOIST The - Honeywell Safety Products
MILLER DURAHOIST The - Honeywell Safety Products
MILLER DURAHOIST The - Honeywell Safety Products
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
USER INSTRUCTIONS - ENGLISH<br />
7.2 Mounting Winches to Winch Brackets<br />
7.2.1 Mounting the DH-19-<strong>MILLER</strong> to the MightEvac<br />
1<br />
2<br />
3<br />
1.) Mount only the DH-19-<strong>MILLER</strong> to<br />
the mast, short end up, by choosing an<br />
appropriate hole set and by inserting<br />
the two pins.<br />
2.) On the MightEvac bracket, insert<br />
only the top pin.<br />
3.) Holding the MightEvac by the<br />
handle on the back, and making sure<br />
the inserted pin is on the top half of the<br />
bracket, hang the MightEvac onto the<br />
DH-19-<strong>MILLER</strong>.<br />
4.) Secure by inserting the second pin<br />
through the bottom hole sets of both the<br />
DH-19-<strong>MILLER</strong> and the MightEvac<br />
brackets.<br />
4<br />
NOTE: Make sure rescue<br />
handle rotates 360° with<br />
no interference.<br />
7.2.2 Mounting the DH-19-<strong>MILLER</strong> to the ManHandler<br />
1<br />
1<br />
2<br />
Insert<br />
Align the DH-19-<strong>MILLER</strong> (illustrated<br />
hole set) with ManHandler.<br />
Note: <strong>The</strong> illustrated hole set on the<br />
DH-19-<strong>MILLER</strong> is the only set that<br />
will fit the ManHandler.<br />
pins into both hole sets, as<br />
shown.<br />
2a<br />
2b<br />
22
Change language