MILLER DURAHOIST The - Honeywell Safety Products
MILLER DURAHOIST The - Honeywell Safety Products
MILLER DURAHOIST The - Honeywell Safety Products
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
USER INSTRUCTIONS - ENGLISH<br />
7.2 100/200 & DH50 Series Winch<br />
Bracket Assembly & Installation<br />
7.2.6 Mounting the DH-19 to the Basic Winch (DH50S)<br />
1 2<br />
1<br />
2<br />
3<br />
Insert bolts back into DH-19 and<br />
apply to plate on back of the<br />
DH50S Basic Winch.<br />
To hold DH-19 in place, fasten nut<br />
to top bolt first.<br />
Secure a snug fi t by tightening nut<br />
with an 7/32” allen wrench and a<br />
9/16” hex wrench.<br />
3 4<br />
4<br />
Flip Basic Winch over and repeat<br />
step 3 to bottom bolt. Snug both<br />
nuts to approx. 20 ft-lbs.<br />
7.2.7 Competitor Units - DH-AB-DBI & DH-AB-DBI/30<br />
Miller can provide these two brackets that allow for mounting DBI<br />
SRL units with retrieval to the DH-1, DH-2 and DH-3 provided<br />
retrieval unit has appropriate mounting bracket.<br />
D H-A B-D BI<br />
DH-A B-D BI/30<br />
DH-AB-DBI is used for mounting unit on back side of DH-3.<br />
DH-AB-DBI/30 is used for mounting unit on front side of DH-3 and<br />
provides proper cable angle to pulley.<br />
Please note, DBI brackets must be used with DH-19 bracket for<br />
attachment to mast assembly.<br />
25
Change language