MANUALE ISTRUZIONI E CATALOGO RICAMBI ... - Nice-service.com

1) Description of the product:This gate and door automation unit controls the ROBO, OTTO andTHOR gearmotors with single-phase alternating current.The control unit varies depending on the type of gearmotor to control,e.g.: Force Adjustment, Gate Open Indicator and Courtesy Light.It also features a series of functions that can be selected by “Dip-Switches” (mini-switches) and adjustments performed by Trimmers.The control unit features input status Led’s located near such inputs,while another Led near the microprocessor indicates that the internallogic works correctly.To make it easier to recognise the various parts, fig.1 shows themain components.GBABCDEXTVWUSZYOKRQFCHAPP.P.FOTOFCCFCAGHIJABCDEFGHIJLMNOPQRSTUVWXYZFunction selection Dip-SwitchForce adjustment trimmerWorking Time TL adjustment trimmerPause Time TP adjustment trimmerTerminal board for aerial and 2nd channelRADIO board slotInput status LED’sInput/output control terminal board“Common” relayPower input terminal board / Flashing lightPrimary transformer connectorLine fuse (5A)“Courtesy Light” output connector (only on OTTO)Motor power outputCapacitor slot connector“Torque” relayTriac “Courtesy Light” (only on OTTO)Triac CloseTriac OpenSecondary transformer connectorFCA / FCC limit switch inputLow voltage rapid fuse (500mA)PIU board slotOK LedMicroprocessorPONML1Product Code* Control Unit Code* Additional FunctionROBORO1000RO1020ROA3Force adjustment TrimmerRO1010 ROA4 “Torque” RelayTHORTH1551 THA5 Force adjustment TrimmerTH2251 THA6 “Torque” RelayOTTO OT21 OTA1 “Courtesy Light” output* = add to code V1 for the 120 V 50/60 Hz version.5