TV EXPLORER HD+ manual - Promax

USER’S MANUAL. TV EXPLORER HD +[24] TUNING BY CHANNEL OR FREQUENCYSwitches tuning mode between channel and frequency. In channel mode thetuning frequency is defined by the active channels table (CCIR, ...).Key number 0 to enter numeric data.[25] AUTO ID/ EXPLORERActivates the automatic identification function (short pulsation):The instrument will try to identify the signal under test.First it recognises whether the signal is an analogue channel or a digital one.If the channel is analogue, it determines the television standard of the signaldetected.When the signal is digital, it analyses the modulation type: DVB-T / DVB-T2 /DVB-C / DVB-S / DVB-S2 and all the associated; parameters such as thecarriers 2k-8k, the symbol rate, the code rate, etc and it tries to lock to thesignal.In the spectrum analyser and measurements mode, it appears on screen thename of the network and the orbital position (only in satellite band).Activates the band exploration function (long pulsation):The meter explores the entire frequency band to identify the analogue anddigital channels present.30Figure 5.- Top panel view.Page 26 01/2011