TV EXPLORER HD+ manual - Promax

USER’S MANUAL. TV EXPLORER HD +When selecting the COMMANDS option in the Spectrum Analyser mode[13] in the screen will appear a dynamic execution line in order to use with thepositioner commands: DRIVE EAST / WEST. This allows to carry out a fine adjustmentin steps or in seconds to aim the antenna through the rotary selector [1].Figure 74.- DiSEqC commands: DRIVEPress the DiSEqC key [21] on frontal panel in order to quit the commandsexecution mode and to locate the mark cursor on the frequency or channel.5.26 SATCR functionBy means of function SATCR it is possible to control the devices of a TVinstallation satellite that are compatible with the SatCR 10 technology (Satellite ChannelRouter), which allows to concentrate manifold down frequencies (slots) by an only cable.By this way each user using a slot can tune and decode any signal present in thesatellite.In order to select the SATRC function, press the DiSEqC key[21] from frontalpanel, and using the rotary selector [1] activate the SATRC option. In the displayare the configuration options that users can modify: slot selection, number of slots,device address, Frequency sep, pilot signal activation, and finally the frequenciescorresponding to each slot.10SatCR is a trademark of STMicroelectronics.Page 98 01/2011