TV EXPLORER HD+ manual - Promax

USER’S MANUAL. TV EXPLORER HD +sp/other/Deletes a frequency spectrum.Deletes any other kind of capture.When pressing with the rotary selector [1] over the option will appear a menuthat contains the names of the stored files. Select one by means of the rotary selector[1] or press EXIT.5.20 PRINT SCREEN functionIt is also possible to save anything that appears on the screen of the meter usingthe “PRINT SCREEN” function. To save an image you only need to press the key[10] during a few seconds. A file with the screen content in bit map format (bmp)will be generated automatically. These files can be viewed later on using any programthat supports .bmp formats.To delete one or more of the captured images, press [22] and selectDELETE PRINT SCREEN. You will see a list of captured screens files. To delete a file,place on it and press the rotary selector [1]. To delete all stored files place on ALLoption and press the rotary selector [1].EnglishNOTE:You cannot use this function in the case of OSD messages.5.21 USB On-the-Go FunctionThe TV EXPLORER HD + has a female mini USB port that uses a specificcommunication protocol called USB On-The-Go (OTG abbreviated). This type ofcommunication allows the equipment to work in two different ways depending on theelement connected to the USB port: as a server (host) or as a device (slave). In general,the TV EXPLORER HD + works as a host when connecting a USB flash drive and as aslave when connecting to a computer. This function converts the PC into a much moreversatile instrument.01/2011 Page 85