TV EXPLORER HD+ manual - Promax

USER’S MANUAL. TV EXPLORER HD +[38] CAM module extraction buttonPress it to remove a CAM module inserted into the connection socket [38].[39] HDMI Connector (High-Definition Multi-media Interface).[40] USB ConnectorIt enables the communication with a PC, and to download dataloggers andchannel plans.[41] CAM module connection socketEnables the conditional access (desencryption) of encoded digital TV signals inagreement with DVB-CI (Common Interface) recommendation.[42] TS-ASI Output.[43] TS-ASI Input.5.2 Adjustment of Volume and Monitor ParametersRepeatedly pressing the [20] key sequentially activates the VOLUME,CONTRAST, BRIGHTNESS, SATURATION and HUE control menus (this last only forNTSC colour system). On activation of a menu for a specific parameter the screendisplays a horizontal bar whose length is proportional to the parameter level, to modifythis value simply turn the rotary selector[1]. To exit the menu and validate the newEnglishvalue press the rotary selector [1].5.3 Selecting the Operation Mode: TV / Spectrum Analyser /MeasurementsThe TV EXPLORER HD + has three basic operation modes: TV, SpectrumAnalyser and Measurements. To switch from TV operation mode to the SpectrumAnalyser press [13] key. To switch to the Measurements mode press [12] key.In the TV operation mode the demodulated television signal is shown on-screen;this is the default operation mode, various functions can be selected, as shown in thefollowing paragraphs.In the Spectrum Analyser operation mode the screen displays the spectrum ofthe active band (terrestrial or satellite). The span and the reference level.In the Measurement mode the screen shows the available measurementsaccording to the type of signal selected.01/2011 Page 29