TV EXPLORER HD+ manual - Promax

USER’S MANUAL. TV EXPLORER HD +Next it is explained every option:Copy To PendriveIt copies all files from the memory of the instrument to the memory connected tothe USB port, except for the video file stream.When copying files, it also copies the whole structure of folders from theinstrument. It creates a general folder called EXPLORER and within this folder arethe following series of folders:CAPTZ:CH:DATALOG:DISEQC:PVR:SKINS:VAR:Here are stored the captures of the MER, the SPECTRUM andothers.Here are stored the terrestrial and satellite channels plans.Here are stored the data acquisition files.Here are stored the DiSEqC programs.Here are stored the TS-ASI video stream.Here are stored several colours skins for the screen.Here are stored the screenshots.Get From PendriveIt performs the function opposite to the previous explained one, that is, to copyexisting files from USB memory to the folders at the TV EXPLORER HD +memory. To perform this function is necessary to have the same structure offolders in both USB memory and TV EXPLORER HD +.EnglishCopy Streams to PendriveIt copies TS files recorded from a service inside the PVR folder of the pendrive.Normally this is the file that takes up more space and time. For this reason thisoption is independent of the copy of the rest of files.5.21.2 Connecting a computer (host) to the TV EXPLORER HD + (slave)To connect a TV EXPLORER HD + with a computer, you should install the drivers(if they are not installed yet) you have in the folder USB_DRIVERS, on the memorysupport delivered with the instrument. To install drivers follow the steps described in themanual.01/2011 Page 87