TV EXPLORER HD+ manual - Promax

USER’S MANUAL. TV EXPLORER HD +If the AUTO ID function is launched in the spectrum analyser mode, the name ofthe network will appear temporarily on screen (it also appears in the measurementdisplay). In case of working in the satellite band the orbital position appears as well.While performing automatic identification may be the equipment keeps detectingthe NETWORK ID for a long time. During this process, the CANCEL button switches toSKIP, which allows bypassing the NETWORK ID without losing the other parameters ofthe autodetection.Whenever the process detects new parameters for a channel or frequency willcreate a new channel plan containing the detected information.NOTE: The icon in the upper corner of a digital measurement screen statesthat the signal level is higher than the minimum threshold (see thePREFERENCES menu) but demodulator cannot lock it maybe due to somewrong configuration parameter.In such case, the user must press AUTO ID[25] key.NOTE: In the case that is desired to explore or identify DVB-C signals will benecessary to select previously a DVB-C standard as digital signal identifierEnglishby means of[22] PREFERENCES menu.5.9 Channel plansThe signal automatic identification process as much as the exploration of thefrequency spectrum could yield the generation of new customised channel plans relativeto the usual work locations of the meter equipment.In this way the characterisation of the band will be faster and easier when causingthat the equipment only analyses a shorter set of channels.Whenever a new process of exploration is activated, the TV EXPLORER HD +analyses all the present channels in the active channel plan, which acts as patternchannel plan specified by means of the option CHANNEL SET from configurationmeasurement menu: CONFIGURATION [17].01/2011 Page 33