TV EXPLORER HD+ manual - Promax

EnglishUSER’S MANUAL. TV EXPLORER HD +VBERLBER(Only for DVB-S) The BER measurement (Bit error rate) for thedigital signal after error correction (BER after Viterbi).(Only for DVB-S2) The BER measurement (Bit error rate) for thedigital signal after error correction (BER after LDPC).In order to change the measurement highlighted, press the [12] key. On themonitor will appear cyclically all the measures available for the signal on tune.5.14.1 Analogue TV: Measuring the Video Carrier LevelIn the measurement mode of analogue signals, the TV EXPLORER HD +, monitorcan work as an analogue indicator of level representing the signal present in the input.In order to change the measurement mode pressscreen like the following one:[12] key, it will appear aFigure 23.- Analogue signal level measurement in terrestrial band.Turn the rotary selector[1] to change the tuning channel/frequency. Press the[12] key to select the type of measurement to highlight on the monitor.The available types of measurements are:LEVEL:C/N:V/A:Level indication on the upper part of the screen (analoguebar).Carrier/Noise ratio measurement.Video/Audio ratio measurement.01/2011 Page 49