TV EXPLORER HD+ manual - Promax

USER’S MANUAL. TV EXPLORER HD +6 DESCRIPTION OF THE INPUTS AND OUTPUTS6.1 RF inputThe RF input is through the RFsignal level should never exceed 130 dBµV.[30] connector on the side panel. The peak6.2 TS-ASI Input / OutputThe TS-ASI input / output signals works through the connectors[43] (output) at the rear panel.[42] (input),6.3 USB portThe TV EXPLORER HD + incorporates an “USB On-the-go“ port, which enablesthe communication with a PC, and to download dataloggers and channel plans.Figure 76.- “USB On-the-go” connector in rear panel. External view.The “USB On-the-go“ makes it possible for two USB devices to communicate witheach other without requiring a separate USB host. In practice, one of the USB devicesacts as a host for the other device.English6.4 HDMI Conector (High-Definition Multimedia-Interface)HDMI (High-Definition Multimedia Interface) is a compact audio/video interface fortransmitting uncompressed digital data. HDMI supports, on a single cable, any TV or PCvideo format, including standard, enhanced, and high-definition video; up to 8 channelsof digital audio; and a Consumer Electronics Control (CEC) connection. The CEC allowsHDMI devices to control each other when necessary and allows the user to operatemultiple devices with one remote control handset.Figure 77.- HDMI Connector at the rear panel. External view.01/2011 Page 101