TV EXPLORER HD+ manual - Promax

USER’S MANUAL. TV EXPLORER HD +Figure 69.- Digital channel monitoring.When pressing the cursor arrow[6] key will appear the tuning informationwindow again, in order to fix on screen this window the vertical cursorsbe pressed up to select the OSD:OFF field, so press rotary selectorOSD:ON.[6] key must[1] to switch toAlso the standard MPEG-2 profile is indicated which determines the compressionrate for the digital service decodified, the aspect ratio (4:3), the resolution (horizontal xvertical) for received video and the picture refreshment frequency rate. In the (OSD:OFF)mode the information window previously described will appear whenever the rotaryselector is pressed again [1].When a digital channel is decodified, once the Table of Services SDT (ServiceDescription Table) acquisition is completed, is possible to accede to the list ofservices contained in the Table.For it place the field selector, by means of the vertical cursors [6] key, on thefield of the active service (e.g. VTV 1 in the following figure) and later press the rotaryselector [1].The DIGITAL SERVICES menu will appear then with the services available in thedigital Multiplex. Move the vertical cursors[6] key or turn the rotary selector[1] and press it to select the service to visualise on screen.In the list of available services, a service may appear preceded by a symbol, withtwo possible meanings:(*) Indicates that the service is encrypted.Page 92 01/2011