Toyota TNS410 - PZ420-E0333-EN - TNS410 - mode d'emploi
Toyota TNS410 - PZ420-E0333-EN - TNS410 - mode d'emploi
Toyota TNS410 - PZ420-E0333-EN - TNS410 - mode d'emploi
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
26 OPERATION<br />
Setup of This Receiver<br />
Setup of This Receiver<br />
You can select the guide tone, illumination<br />
and other useful functions of this receiver.<br />
1<br />
Main Unit Settings<br />
Hold down the [SRC] button for 1 or<br />
more seconds to turn the audio <strong>mode</strong><br />
OFF.<br />
■ Enable guide tone<br />
Turn the “Guide tone” ON or OFF. If turned<br />
ON, a guidance tone can be heard when you<br />
operate a button.<br />
1 Touch Enable guide tone .<br />
● It turns ON and OFF each time you touch<br />
Enable guide tone .<br />
2<br />
3<br />
Press the [SCRE<strong>EN</strong> AV/NAV] button<br />
to call the Audio screen.<br />
Hold down the [CTRL] button for 1 or<br />
more seconds.<br />
2 Touch Next .<br />
3 Touch Done .<br />
ATT<strong>EN</strong>TION<br />
The guide tone will only be output when the<br />
audio (other than that of an iPod/USB) is<br />
operated.<br />
■ Enable AUX<br />
Turn the “AUX setting” ON or OFF. If it is ON,<br />
you can select the AUX input.<br />
1 Touch Enable AUX .<br />
● It turns ON and OFF each time you touch<br />
Enable AUX .<br />
2 Touch Next .<br />
3 Touch Done .
Change language