Toyota TNS410 - PZ420-E0333-EN - TNS410 - mode d'emploi

AUDIO OPERATIONS
53
Using the USB Music File Player
This receiver can play a music file stored in a USB memory. This receiver can play MP3 files
only.
IMPORTANT
You can play a music file of USB memory only when the PND is attached to this receiver.
SRC
Track selection / Fast-forward (rewind) button
Playing USB Music Files
CAUTION
● After connecting the USB memory (while a
message “Don't remove the storage
device until scanning is finished” is
displayed), do not turn off the power or
remove the PND/USB memory. Before
removing the USB memory, switch the
display to the audio screen and touch
.
IMPORTANT
When a USB memory device is attached, the
receiver may take a time to scan and read
the file tag information. To shorten this scan
time, try to store only MP3 files in the USB
memory and to reduce the number of folders
in the USB memory.
1
Connect the USB memory to the USB
connector.
2
● Playback will begin.
It is possible to fast forward/rewind the track
currently being played.
1
Press the [SRC] button repeatedly
until “USB” is displayed on the subdisplay.
Fast Forward/Rewind
Hold down the [SELECT (Right)] or
[SELECT (Left)] button for 1 or more
seconds.
● To the right:
Fast forwards a track.
To the left:
Rewinds a track.
This switches to the fast forward or rewind
mode, and continues fast forwarding or
rewinding until you remove your finger
from the button.