Print RSH-2455 _25 lgs.qxd - Castorama
Print RSH-2455 _25 lgs.qxd - Castorama
Print RSH-2455 _25 lgs.qxd - Castorama
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>RSH</strong>-<strong>2455</strong> _<strong>25</strong> <strong>lgs</strong>..<strong>qxd</strong> 9/19/03 3:06 PM Page 13<br />
F GB D E I P NL S DK N FIN GR HU CZ RU RO PL SLO HR TR EST LT LV SK BG<br />
PROBLEM<br />
Motor won't start.<br />
The machine cut off suddenly.<br />
Material not being drawn down into<br />
the machine.<br />
Material not properly separeted<br />
when it has been shredded.<br />
Direction of rotation changes<br />
automatically.<br />
English<br />
TROUBLESHOOTING<br />
POSSIBLE CAUSE<br />
1. No main voltage.<br />
2. Power cord/plug coupling faulty.<br />
3. Material was hold/jammed<br />
in blade.<br />
1. Overload protector cutoff because<br />
materials was jammed in a<br />
long time.<br />
2. Motor thermo-protector cutoff.<br />
Cutting blade running backwards.<br />
A big clearance between shaving<br />
plate and blade.<br />
Material blockage.<br />
13<br />
SOLUTION<br />
1. Check fuse.<br />
2. Check, replace.<br />
3. Reversal, take out the material.<br />
1. Wait for 5minutes,press the overload<br />
protector,reversal and take out<br />
the material.<br />
2. Wait for 5 minutes, switch it<br />
on again.<br />
Change direction of rotation.<br />
Readjust the clearance to 0-0.5 mm.<br />
Switch off, wait until it has stopped<br />
completely and then switch it<br />
on again.