Samsung Multifunzione b/n MultiXpress SL-K7400GX (A3) (40 ppm) - User Manual_36.16 MB, pdf, ENGLISH

SyncThru Web Service
This chapter gives you step-by-step instructions for setting up the network
environment through SyncThru Web Service.
2
Required web browser
• Internet Explorer® 6.0 or higher is the minimum requirement for
SyncThru Web Service.
• Some menus may not appear on the display screen depending on the
settings or models. If so, it is not applicable to your machine.
You need one of the following web browsers to use SyncThru Web Service.
• Internet Explorer® 6.0 or higher
• Chrome 4.0 or higher
• FireFox 3.0 or higher
1
• Safari 3.0 or higher
What is SyncThruWeb Service?
If you have connected your machine to a network and set up TCP/IP network
parameters correctly, you can manage the machine via SyncThru Web Service.
Use SyncThru Web Service to:
• View the machine’s device information and check its current status.
• Change TCP/IP parameters and set up other network parameters.
• Change the printer preference.
• Set the email notifications advising of the machine’s status.
• Get support for using the machine.
• Upgrade machine software.
3
Connecting to SyncThru Web Service
IPv4 supported web browser
1
Start a web browser, such as Internet Explorer®, that supports IPv4
addressing as a URL.
Enter the machine’s IP address (http://xxx.xxx.xxx.xxx) in the address
field and press the Enter key or click Go.
You can get the machine’s IP address from the machine (see"Report" on
page 328).
2
Your machine’s SyncThru Web Service website opens.
8. Management Tools
182