Brasil na PulPaper - Revista O Papel

19. Malkow T. , Mäkipää M.I., Ungeheuer J., Fordham R.J., Baxter D.J., Cyclic TGA testing to evaluate chloride enhanced oxidationresistance of superheater steels, 11th International Conference on Pulp & Paper Industry Corrosion, Charleston, SouthCarolina, 2004.20. Mikkanen P., Jokiniemi J. K., Kauppinen E., Vakkilainen E., Coarse ash particle characteristics in a pulp and paper industrychemical recovery boiler, Fuel, Vol. 80, pp. 987-999, 2001.21. Minday A., Reid D., Burke M., Brown C., An Overview of Various Strategies for Balancing Salt cake, Chloride and PotassiumLevels in an ECF Kraft Mill, Presented at the TAPPI Minimum Effluent Symposium, San Francisco, Oct. 23-24, 1997.22. Mäkipää M. , Kauppinen E., Lind T., Pyykönen J., Jokiniemi J. , McKeough P., Oksa M., Malkow Th., Fordham R.J., BaxterD., Koivisto L., Saviharju K., Vakkilainen E., Superheater tube corrosion in recovery boilers, 11th International Conferenceon Pulp & Paper Industry Corrosion, Charleston, South Carolina, 2004.23. Milanez A.F., Characterization of ions concentration in industrial pulp production and chemical recovery systems, RevistaO Papel, August, pp. 48 – 83. Brazil, 200724. Montgomery M.,; Maahn, EE., Nielsen, K.A., Gotthjælp K., Brøndsted P., Jansen, P., High Temperature Corrosion of SuperheaterMaterials for Power Production through Biomass, ISBN: 87-550-2205-7 , 167p, 1996.25. Nielsen H.P., Frandsen F.J., Dam-Johansen K., Baxter L., The implications of chlorine-associated corrosion on the operationof biomass-fired boilers, Progress in Energy and Combustion Science, Vol. 26, pp. 283–298, 2000.26. Pyykönen J.; Jokiniemi J., Modelling alkali chloride superheater deposition and its implications, Fuel Processing TechnologyVol.80, pp.225–262, 2003.27. Salmenoja K., Hupa M., Backman R., Laboratory studies on the influence of gaseous HCl on fireside corrosion of superheaters,Journal of the Institute of Energy, Vol. 72, pp. 127-133. 1999.28. Salmenoja, K., Mäkelä, K., Relations between superheater corrosion conditions in a black liquor recovery boiler and a powerboiler fired with biofuels, Nordic Pulp and Paper Research Journal, Vol 15 no.1. 2000.29. Salmenoja K., Superheater corrosion in modern recovery boilers, presented at International Recovery Boiler Conference,Porvoo, Finland. 2004.30. Salmenoja, K., Tuiremo, J., Achievements in the control of superheater corrosionin black liquor recovery boilers, Tappi Engineering,Finishing & Converting Conference, Tappi Press, Atlanta, GA, 9 p. 2001.31. Skrifvars B.J., Backman R., Hupa M., Salmenoja K., Vakkilainen, E., Corrosion of superheater steel materials under alkalisalt deposits. Part 1: The effect of salt deposit composition and temperature, Corrosion Science, Vol. 50, pp. 1274–1282. 2008.32. Suik, Heinrich, Catastrophic corrosion of superheater tubes. UEF Conference on Behavior of Inorganic Materials in RecoveryBoilers, Bar Harbor, Maine, 4 - 9, United Engineering Foundation, 13 p. June 2000.33. Tran H., Fouling of tube surfaces in kraft recovery boilers presented at International Recovery Boiler Conference, Porvoo,Finland. 2004.34. Tran, H. N., Villarroel, R., Effect of CNCG Combustion on Recovery Boiler Performance and Precipitator Dust Composition,Tappi Engineering Conference, Tappi press, Atlanta. 1999.35. Vakkilainen E., Kraft recovery boilers – Principles and practice, Chapter 10, The Finnish Recovery Boiler Committee, ValopainoOy, Helsinki, Finland. ISBN 952-91-8603-7, 244 p. 2005.36. Warnqvist B., Norrström H., Chlorides in the recovery boiler ad a mechanism for chloride removal, TAPPI Press Vol 59, 11(89-91). 1976.37. Yli-Olli S., Pohjanne P., Heikinheimo L., Kinnunen T., Pankakoski P.H., Sulphidation of advanced kraft recovery boiler materials,International Chemical Recovery Conference, Canada, 2007.O PAPEL - Junho 2010 O PAPEL vol. 71, num. 6, pp. 57 - 71 JUN 201071