blocstop™ BSO - O. Rosinski GmbH

The manufacturer hereby declares
Greifzug Hebezeugbau GmbH
Scheidtbachstraße 19–21 51469 Bergisch Gladbach
represented by
Dr. Ing. Uwe Schuht
Managing Director
DECLARATION OF CONFORMITY
Installation and operating manual
that the machine described complies with technological safety standards that were applicable to the equipment in the EUROPEAN
UNION when it was launched on the market by the manufacturer.
APPLICABLE DIRECTIVES AND STANDARDS:
2006/42/EC;
EN 1808; EN ISO 12100-1; EN ISO 12100-2; EN ISO 14121-1
DESIGNATION
Independent secondary brake
APPLICATION
Transport of persons
MODEL
BSO 2050, BSO 2360
SERIAL NUMBER
Year of manufacture
from 01.2010
The above-mentioned machine matches the model specified on the prototype testing certificate, approved by the following certificate
numbers
09 261
Commissioning the machine is prohibited until the machine in which this is installed complies as a whole with the regulations of the
2006/42/EC Directive, the corresponding national legislation for implementing the regulations in accordance with national law and the
corresponding declaration of conformity has been issued.
The valid EN 1808 standard must be applied for the PAM in which the machine is installed.
Issuer of the prototype testing certificate:
Fachausschuss Bau (BAU) und Tiefbau (TB)
Test and certification centre BG-PRÜFZERT
Landsberger Str. 309
80687 München
notified as No. 0393 at the European Union Commission
Responsible for the documentation:
Dr. Ing. Uwe Schuht, Tel.: +49 (0) 2202 1004 63
Bergisch Gladbach, date
G905.5 - 02/2011 EN-19