mitac 8355.pdf - tim.id.au

8355 N/B MAINTENANCE
5. Unscrew two screws to slide out the hard disk drive from the compartment. (Figure 2-13)
Reassembly
Figure 2-13 slide out the hard disk drive
1. Fit the hard disk drive into the holding and secure with two screws.
2. Replace the hard disk drive into compartment and secure with two screws.
3. Fit the top shielding and secure with three screws.
4. Replace the HDD’s cover and secure with one screw.
5. Then replace battery pack. (See section 2.2.1 Reassembly)
Figure 2-14 Free the hard disk
6. To free the hard disk drive, remove two screws that secure the holding. (Figure 2-14)
78