mitac 8355.pdf - tim.id.au

8355 N/B MAINTENANCE
8. Carefully put the notebook upside down,remove two screws of the hinges,Now you can separate the LCD assembly
from the base unit. (Figure 2-21)
Reassembly
Figure 2-21 Remove the LCD assembly
1. Attach the LCD assembly to the base unit and secure with four screws of the hinges.
2. Reconnect the LCD wires to the system board..
3. Fit two hinge covers and secure with two screws.
4. Replace the battery pack and the keyboard. (See section 2.2.1 and 2.2.2 reassembly) .
83