You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
6.~PERATIOlV (POWER TRIM/TILT TYPE)<br />
Power Tilt Switch (Motor Pan)<br />
POWkR TILT SWITCH<br />
The power tilt switch located on the<br />
motor pan is a convenience switch for<br />
tilting the motor for trailering, or per-<br />
forming outboard motor maintenance.<br />
This power tilt switch should only be<br />
operated when the boat is stopped and<br />
the motor is off.<br />
Manual Relief Valve<br />
.IEF<br />
MANUAL<br />
(To release)<br />
Do not turn this screw. If this screw is<br />
turned hydraulic oil will bleed out of<br />
the power trim/tilt system. Should this<br />
happen it will be necessary to contact<br />
your closest authorized <strong>Honda</strong> <strong>Marine</strong><br />
dealer and have the system refilled.<br />
If the power trim/tilt switch will not<br />
tilt the outboard motor, the motor can<br />
be manually tilted up or down by<br />
operating the manual relief valve. To<br />
tilt the outboard motor manually, turn<br />
the manual relief valve under the left<br />
stem bracket no more than 1 or 2 turns<br />
counterclockwise using a screw driver.<br />
After tilting the motor, turn the manual<br />
relief valve clockwise securely. The<br />
manual relief valve must be tightened<br />
securely before operating the motor or<br />
the motor could tilt up when operating<br />
in reverse.
Change language