RPL: RAH, Size 077, Vintage C, RoofPak Draw Thru / Blow Thru Air ...

Section N- Main Control Box
Power Panel— Until 3/05
Fan Motor Contactors, Overloads and Fusing
Components, Continued
15 Horsepower Supply or Return Fan Motor- Code 22 or 32= M.
Across- The- Line Start (C10= AL)
Sch. Part Part Voltage
Sym. Description
Contactors
Number 208V 230V 380V 460V 575V
M10,20 Contactor- Supply (M10), Return (M20) Fan Motor 027514404 1 1
Contactor- Supply (M10), Return (M20) Fan Motor
Fuse Block and Fuses
027514402 1 1 1
FB10,20 Fuse Block- Supply (FB10), Return (FB20) Fan Motor 023780213 1
Fuse Block- Supply (FB10), Return (FB20) Fan Motor 023780209 1
Fuse Block- Supply (FB10), Return (FB20) Fan Motor 023780205 1 1 1
Fuse- FB10 or FB20 025860515 3
Fuse- FB10 or FB20 025860514 3
Fuse- FB10 or FB20
Overloads and Heaters
OL10,20 Overload- Supply (OL10), Return (OL20) Fan Motor
025860409 3 3 3
Until 1/98 030189400 1
Until 1/98 030189300 1
Until 1/98 030189200 1 1 1
1/98 and later
Overload Heater- OL10,20
059990101 1 1 1 1 1
Standard Efficiency Motor (C22/32= _AY or _GY) 025861600 1 1
Standard Efficiency Motor (C22/32= _AY or _GY) 026111700 1 1
Standard Efficiency Motor (C22/32= _AY or _GY)
High or Prem.Eff. Motor (C22/32= _EY,_FY,_JY,_KY)
026114500 1
1
1/98 and later 059990616 1
1/98 and later 059990615 1
1/98 and later
LR10,20 Line Reactors
059990612 1 1 1
2
NOTE: Quantities Listed are PER motor.
1 For High Efficiency motors used on units built prior to 1/98, see the Overload Heater Chart at the end of this section (located on the
page following the 50HP motors).
2 When the unit has an inverter with bypass (C14= 1, 2, 3, 4, 5, 8) the line reactors are located in the bypass box. When there is no inverter
bypass box the Line Reactors are located in the Main Control Power Panel. The Line Reactor part numbers are listed in Section F.
RoofPak Singlezone; RAH 077 “C” Rev. Q 07/12 RPL 700008300 / Page 179