Contributor, The Textile Industry and the Environment, UNEP

78 ANNEX A
US ENVIRONMENTAL PROTECTION AGENCY ENVIRONMENTAL RESEARCH INFORMA­
TION CENTRE, Technology Transfer, 1974, In-Plant Control ofPollution and Upgrading Textile
Operations to Reduce Pollution, Institute of Textile Technology.
US ENVIRONMENTAL PROTECTION AGENCY ENVIRONMENTAL RESEARCH INFORMA­
TION CENTRE, Technology Transfer, 1978, Environmental Pollution ContTolin the Textile Processing
Industry.
US ENVIRONMENTAL PROTECTION AGENCY ENVIRONMENTAL RESEARCH INFORMA­
TION CENTRE, Technology Transfer, October 1979, Development Document/or Effluent Limitations
Guide/inesand Standardsjor Textile Mills, Environmental Pollution Control in Textile Processing
Industry.
GENERAL REFERENCES
Environmental Auditing
BOLAND E.W., 1988, "Environmental Auditing Can Minimize the Risk of Not Being in Compliance
and of Knowing It, A Self Appraisal", American Dyestuff Reporter, Vol. 3, No. 27.
CUTLER R.W., 1985, Environmental Auditing: The Keystone to a management compliance, control
and risk assessment program, Environmental Auditing Fundamentals and Techniques, John Wiley
and Sons.
HARRISON L.L., 1984, The McGraw-Hili Environmental Auditing Handbook, A Guide to Corporate
and Environmental Waste Management, McGraw-Hill Book Company, U.S.A.
HARVEY H., May 1978, "Your Mill Can Profit From Energy Audit", Textile World, p. 143.
NEWTON J., 1989, Environmental A uditing, Pudvan PubJishIDg Co., Northbrook, Illinois, USA.
ONTARIO WASTE MANAGEMENT CORPORAnON, 1981, Industrial Waste Audit and Reduction
Manual, Canada.
UNITED NAnONS ENVIRONMENT PROGRAMME - INDUSTRY AND ENVIRONMENT
OFFICE, January 1989, Environmental Auditing, Technical Report Series No.2, Paris France.
UNITED NATIONS ENVIRONMENT PROGRAMME - INDUSTRY AND ENVIRONMENT
OFFICE, and UNITED NAnONS INDUSTRIAL DEVELOPMENT ORGANIZAnON, 1991, Audit
and Reduction Manual for Industrial Emissions and Wastes, Technical Report Series No.7, Paris,
France.
Chemical Safety, Occupational Safety and Chemical Transport
ETAD, 1992, Colorants and the Environment - Guidance for the User, ETAD Information Notice
No.4.
ETAD, 1989, Guidelines for Safe Handling of Dyes.
ETAD, 1983, Guidelines for the Safe Handling ofDyestuffs in Color Storerooms.
BTAD, Reactive Dyes - Mode of Action and Safe Handling.
ETAD, 1987, Safety Instructions for Handling of Colorants.
ETAD, 1992, Information Notice No.3 (in Italian, English, French).
ETAD, 1993, ETAD Dye Care Initiative, Slide Presentation, Prepared by US Operating Committee.
ETAD, 'Pollution Prevention Guidance Manualfor the Dye Manufacturing Industry.' A cooperative
project between the US Environmental Protection Agency and USOC of ETAD (although more relevant
to manufacturers it has some interest also for dye users).