Power Modular Concept PMC 40

More documents

Recommendations

Info

EN Delivery – Transport - Storage 5.8.2. Positioning of UPS and Battery Cabinet 5.8.3. Final Transport Check before transporting the surface loading and use a adequate forklift to move the equipment to the final position. ! KG HEAVY ! Figure 7 Floor surface must support loading www.rimatrix5.com User Guide PMC 40 Page 18/67 Modifications reserved
5.8.4. Positioning Delivery – Transport - Storage UPS : A minimum 90 cm rear space from the UPS to an obstruction is recommended for proper access to the terminals on the rear site. (see Fig. 8) External Battery : If external battery are needed it’s recommended to install external battery cabinet(s) next to the UPS unit. The external battery can be placed on either side of the UPS unit, but it is recommended to install on left hand side. Check before the installation that the battery voltage values in the ID card or in the Display settings of the UPS and external battery cabinets are the same. WARNING! WARNING! The UPS contains high DC voltages. A qualified person must do the connections between the UPS and the external battery cabinet(s). The battery cabinet is connected electrically in parallel with the internal batteries of the UPS. If available, the internal battery has to be disconnected first because the external battery terminals are hazardous due to the parallel battery string. Battery Racks : External battery racks shall be sized to take the voltage drop in the cable into account. To obtain support and help contact the local office or agent authorized by the manufacturer. Clearances X Y Minimum 900mm 900 mm X UPS Frames Open Doors Open Doors Figure 8 UPS space recommendation Y Battery Cabinet UPS Frames www.rimatrix5.com User Guide PMC40 Page 19/67 Modifications reserved X Open Doors Open Doors Y EN
Page 1 and 2: Power Modular Concept PMC 40 FRIEDH
Page 3 and 4: Table of Contents EN 6.5. Connectio
Page 5 and 6: 2. Safety 2.1. Safety notes Danger!
Page 7 and 8: 2.4. Declaration of Safety conformi
Page 9 and 10: 3. Mechanical Characteristics PMC 4
Page 11 and 12: 4.1.3. Feature : Flexible Battery M
Page 13 and 14: 4.1.7. Single/Parallel-Modules oper
Page 15 and 16: 5.3. Unpacking Delivery - Transport
Page 17: 5.7. Storage of UPS Delivery - Tran
Page 21 and 22: 5.10. Air cooling flow outlet Figur
Page 23 and 24: ! NOTE! 6.1. Preparation for the In
Page 25 and 26: 6.2. Preparation for the Output Cab
Page 27 and 28: 6.4. Configurations and Related Int
Page 29 and 30: 6.4.5. Dual Feed Input Configuratio
Page 31 and 32: 4 5 Front Panel 6.5.2. Connection-
Page 33 and 34: Front panel 4 5 6.5.4. Connection-
Page 35 and 36: www.rimatrix5.com User Guide PMC40
Page 37 and 38: 6.7.3. Input Interfaces Terminal bl
Page 39 and 40: 7. Operation 7.1. Commissioning Ope
Page 41 and 42: 7.2.5. Description of the LCD Statu
Page 43 and 44: 7.2.10. UPS Data DESCRIPTION LCD-DI
Page 45 and 46: 7.2.16. "MAINTENANCE BYPASS" - Mode
Page 47 and 48: Procedures 8. Testing of Parallel F
Page 49 and 50: 8.3. Load Transfer: from Inverter o
Page 51 and 52: 8.5. Replacement of UPS-Module 8.5.
Page 53 and 54: Procedures 7. Open Maintenance Bypa
Page 55 and 56: 8.5.6. How to insert a module in a
Page 57 and 58: 6. Press both ON/OFF Buttons on UPS
Page 59 and 60: 8.6. Maintenance 8.6.1. Introductio
Page 61 and 62: 9. Troubleshooting WARNING! 9.1.1.
Page 63 and 64: 10.3. Generator ON Facilities Optio
Page 65 and 66: Comprehensive Management System •
Page 67: 12. Appendix 12.1. Assembling Instr

Power Modular Concept PMC 40

Create successful ePaper yourself

Delete template?

Save as template?