2011 Annual Report - SBM Offshore

ISO 14001 certification for Dynamic Installer
The Company achieved ISO14001 certification for its wholly-owned installation marine unit ‘Dynamic Installer’ on
the 15th December 2010, with the management office achieving ISO 14001 certification on the 30th December
2010. A number of successful follow-up audits were also completed by ABS:
Marine unit internal ISM and 14001 (audits 13-14 March 2011)
Marine unit internal ISPS (audit 3 July 2011)
Office internal ISM and 14001 (audit 6 July 2011)
ABS annual Doc and 14001 (audit 12-13 October 2011)
Offshore Production
Offshore Production recorded an increase in its Total Recordable Incident Frequency Rate (TRIFR) to 1.00 in
2011, compared to 0.87 in 2010;; and a Lost Time Incident Frequency Rate (LTIFR) of 0.04 in 2011, compared to
0.10 in 2010.
The Offshore fleet operations recorded a year-on-year increase in incidents. This is attributed to improved
reporting and to a relatively high level of incidents on units during both the project works and production start–up
phases - a result of the ‘learning curve’ effect. The Company expects this statistic to improve in future. The
Company has put in place a series of measures to re-inforce safety awareness and training in order to drive down
these statistics in 2012.
The methods used to calculate LTIFR and TRIFR are explained in the notes.
The length of operating time achieved without an LTI provides a good indicator of safety performance. In 2011,
the SBM Offshore fleet was awarded 13 certificates for significant LTI-free periods, with one marine unit, the FSO
Yetagun in Myanmar, achieving 11 years LTI-free.
As part of its drive for continuous improvement, SBM-PC has attained compliance recognition by ABS on a
This is a customized selection from the SBM Offshore N.V. Annual Report 2011
51