OAO Ivatsevichdrev - Siempelkamp

More documents

Recommendations

Info

Tools – practical helpers, from the Stone Age to <strong>Siempelkamp</strong> SIeMpelkAMp | FoUnDRy Model planning machine bed for the 3rd generation in DMG machine tools (left to right) Udo Oepen and Mathias Weil in the engineering department of <strong>Siempelkamp</strong> Giesserei Solidification simulation of the machine bed Teamwork à la Rhineland + Allgäu the intensive cooperation began at the model-planning stage; suggestions and improvements for the cast part structure were discussed and developed. the highly geometric form, which is an ambitious foundry product with its many crossovers, small recesses and precast drillholes, was the result of carefully coordinated joint planning processes. the component is shaped and cast in the molding box; with this optimally suited the word “tool” makes us think of handy objects that we all have stored in our cellar, garage or car. something that our ancestors were using back in the stone Age to make their lives easier. since the advent of industrialization, we have been thinking in larger dimensions, i.e. machines in a larger format. In the 15 th and 16 th centuries, the technical devices created by Galileo Galilei became a source of general interest; and since the French Revolution and the enlightenment, large machines have been simplifying and accelerating many work processes. today, even the giant presses manufactured by siempelkamp fall under the heading of “tools”. the customers of siempelkamp Giesserei develop large machine tools – and we supply the necessary cast components. some of these cast products come full circle, when they are used by the siempelkamp Group. this is the case, for example, with our schiess machining centers – or the milling machines from Deckel Maho Gildemeister, which enrich the machine inventory at Krefeld.
SIeMpelkAMp | FoUnDRy Storage of the machine bed master pattern Molding works for the prototypes method, nothing now stands in the way of the impending start of series production. After cooling to below 300°C in the mold and then cooling to room temperature, the fettlers remove the excess fleet and head cuts. During the joint acceptance testing, the quality control centers performed non-destructive testing by superficial cracking and checked the geometric accuracy of the dimensions. Finally the titanium-grey coating was transferred to the property, and the first machine supports went for machining. the installation of the machine support in the DMG plant at Pfronten is now on the agenda. From there, the product then begins its journey into the factory halls of DMG customers around the world! Ready for loading “Fine-tuning” of the machine bed in the fettling shop 22 23
Page 1 and 2: Issue 02 | 2012 OAO Ivatsevichdrev:
Page 3 and 4: SIeMpelkAMp | eDItoRIAL acillam Dea
Page 5 and 6: SIeMpelkAMp | MACHIneRy AnD PLAnts
Page 21: SIeMpelkAMp | FoUnDRy Machine beds
Page 25 and 26: SIeMpelkAMp | FoUnDRy “Big calibe
Page 35 and 36: SIeMpelkAMp | nUCLeAR teCHnoLoGy 34
Page 41 and 42: SIeMpelkAMp | GRoUP 40 41 Products
Page 73 and 74:
SIeMpelkAMp | nUCLeAR teCHnoLoGy 72
Page 75 and 76:
SIeMpelkAMp | MACHIneRy AnD PLAnts
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
show all

OAO Ivatsevichdrev - Siempelkamp

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?