OAO Ivatsevichdrev - Siempelkamp

SIeMpelkAMp | MACHIneRy AnD PLAnts
three sophisticated concepts
During the short-cycle process, decorative papers impregnated
with melamine or urea resins respectively are pressed onto a
board. Hard chromium-plated press plates, press pads, and hotplatens
are used to do so. the correct pressure and temperature
are the essential factors leading to optimal results.
How can a manufacturer of short-cycle presses position itself
ideally in the market? “on the one hand with excellent pressure
distribution inside the press. siempelkamp scores in this area because
we have effectively transferred our ContiRoll ® expertise over
to our short-cycle press technology. on the other hand, the focus
is on reducing pressing and charging times to achieve maximum
efficiency. With our latest short-cycle press generation we are
faster than ever. Last but not least, the more diversified the
press spectrum, the better customer requirements can be met.
With three different short-cycle press concepts we provide our
customers with custom solutions depending on their product
spectrum and requirements,” explains Ulrich Bens, Product
Manager Laminating at siempelkamp.
Three short-cycle press concepts: pure diversification!
Multi-piston press:
the standard line
Press made by siempelkamp, proven
and tested for twelve years
1. Multi-piston press – the standard line:
used as a benchmark since 2010
siempelkamp’s multi-piston press is firmly established in the
market. this concept demonstrates its strengths when different
board sizes have to be laminated. Boards with thickness ranging
from 3 to 50 mm represent a considerable spectrum. Additionally,
width (infinitely from 1830 mm to 2100 mm) and length (infinitely
from 3660 mm to 5610 mm) are variable.
the features of this multi-piston press have been demonstrating
the special advantages over common short-cycle presses since
2000. this includes a higher number of press cylinders (up to 40)
arranged with shorter distances between them in length and cross
direction – thus ensuring optimal pressure distribution. Instead of
the traditional rows of two cylinders, the cylinders are arranged in
rows of three or more inside the frame opening.
KT 700:
the new high-end line
made by siempelkamp, newly
defined in 2011
58
59
Sophisticated concept:
the Eco line
made by Hapco with siempelkamp
components, under way
since 2011
Pressing pressure 400 n/cm² 600 + 100 n/cm² 400 n/cm²
Press cycles per hour 180 200 120
Charging time/
Pressureless exposure time
8/1.2 sec. 8/0.8 sec. 10/1.5 sec.
optimally suited for customers wanting to manufacture manufacturing sophisticated wanting to manufacture
high-end products according special products, for example, simple furniture and flooring
to european standards with deep embossing, metal panels in an economical
decors, sensitive films and way and with siempelkamp
special coloring
guarantee!