OAO Ivatsevichdrev - Siempelkamp

More documents

Recommendations

Info

Ecoresinator during testing Ecoresinator – cost terminator: New process for fiber blending pays off With its “Cut your cost!” campaign <strong>Siempelkamp</strong> literally puts money in customers’ bank accounts. The innovative MDF method for fiber blending with the “Ecoresinator” saves up to 20 percent in resin and relieves the budget of the plant operator. A good 18 months after the new technology was introduced to the market, we are taking a look at its market position and application results. By Ralf Griesche SIeMpelkAMp | MACHIneRy AnD PLAnts siempelkamp presented its new blending system for the first time at LIGnA 2011. the system promised resin savings of up to 15 percent, better surface quality and capacity increases. A few siempelkamp customers could already convince themselves of this promise. More than ten sold systems a year and a
SIeMpelkAMp | MACHIneRy AnD PLAnts half after market introduction, with three systems having started operation, speak for the high demand of resin-saving machine concepts. this comes as no surprise – low resin costs present a competitive advantage for plant operators. Material savings: the key to production success During MDF production many different factors play a role when it comes to improvi ng and maintaining the efficiency of a plant which is especially important during times of intensive competition, high consumer demands, and increasing material costs. therefore, the objective is to achieve a resource-saving production and high board quality in regard to mechanical and optical properties. “this presents a special challenge for woodbased panel manufacturers and plant build ers because the MDF production process, compared to particleboard produc- Ecoresinator at Starwood tion, is relatively expensive. Due to the system, larger amounts of raw material and energy are used; resin, wood, and energy represent the primary cost units requiring approx. 30 percent each of the total production costs,” says Günter staub, MDF process technology. Innovative technologies and machines can contribute to resource savings during different stages of the production. next to the fiber production process and the forming and press line, the blending process is a keystone for which the use of innovative technology pays off. With the ecoresinator siempelkamp provides a new blending system for MDF production which lowers material consumption as well as optimizes the quality of the blending process. the spray technology as well as the correct setting of the energy needed for the blending process in the blow line are of great importance. With the ecoresinator powered by schlick, siempelkamp supplies state-of-the-art blending technology which, compared to traditional systems, guarantees highquality MDF on the one hand and tremendous resin savings on the other. siempelkamp customers know the value of this innovative technology: Hüseyin yildiz of starwood was the first plant operator who ordered an ecoresinator as a retrofit for his thin MDF production line. “Because we are operating a thin board line, the savings are especially impressive and reach 24 percent at best. on average we are able to save 15 percent across all board thicknesses and densities!” says yildiz. the potential savings offered by the ecoresinator have also convinced many other siempelkamp customers. 26 27
Page 1 and 2: Issue 02 | 2012 OAO Ivatsevichdrev:
Page 3 and 4: SIeMpelkAMp | eDItoRIAL acillam Dea
Page 5 and 6: SIeMpelkAMp | MACHIneRy AnD PLAnts
Page 21 and 22: SIeMpelkAMp | FoUnDRy Machine beds
Page 23 and 24: SIeMpelkAMp | FoUnDRy Storage of th
Page 25: SIeMpelkAMp | FoUnDRy “Big calibe
Page 35 and 36: SIeMpelkAMp | nUCLeAR teCHnoLoGy 34
Page 41 and 42: SIeMpelkAMp | GRoUP 40 41 Products
Page 77 and 78:
SIeMpelkAMp | MACHIneRy AnD PLAnts
Page 79 and 80:
Page 81 and 82:
show all

OAO Ivatsevichdrev - Siempelkamp

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?