Bulletin 1/2011 - Siempelkamp
Bulletin 1/2011 - Siempelkamp
Bulletin 1/2011 - Siempelkamp
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Cutter head<br />
SieMpelkaMp | MACHInERy AnD PLAntS<br />
the two-phase process, drum chipper and knife-ring flaker,<br />
is also used in current projects by Hombak to accommodate<br />
increasingly changing wood types and bent wood. “With little<br />
design effort, however, we would also be able to reduce bent<br />
wood with a cutterhead,” says Werner Schweinsberg.<br />
the advantages of the Hombak cutterhead are evident: Due to<br />
the fact that the knives are pulled through the wood there is a<br />
much better flake quality being generated in comparison to the<br />
regular chipping. With such a knife it is possible to cut perpendicular<br />
as well as parallel to the fibers’ direction.this technology<br />
pays off due to its low energy demand which, next to quality and<br />
production speed, is an argument that may convince plant<br />
operators most.