2013 Infiniti EX37 | Owner's Manual - Infiniti Owner Portal - Infiniti USA

the number of occupants in the vehicle, the
load the vehicle is carrying and the road
conditions.
If the AFS OFF indicator light blinks after
the ignition switch has been pushed to the
ON position, this may indicate that the AFS
is not functioning properly. Have the
system checked by an INFINITI retailer.
When the engine is started, the headlights
will vibrate to check the system condition.
This is not a malfunction.
2-38 Instruments and controls
SIC3270
SIC3628
Instrument brightness control
The instrument brightness control switch
can be operated when the ignition switch
is in the ON position. When the switch is
operated, the dot matrix liquid crystal
display switches to the brightness adjustment
mode.
Push the upper switch *A to brighten the
instrument panel lights. The bar *1 moves
to the + side. When reaching the maximum
brightness, “MAX” appears on the display
*2 .
Push the lower switch *B to dim the
instrument panel lights. The bar *1 moves