2013 Infiniti EX37 | Owner's Manual - Infiniti Owner Portal - Infiniti USA

. The view on the screen on the passenger’s
side switches to the front-side
view *C when the CAMERA button is
pushed *3 . When the CAMERA button
is pushed again *5 , the rear-wide view
*D is displayed. When the CAMERA
button is pushed again *7 , the view on
the screen on the passenger’s side
switches to the bird-eye view *B .
The passenger’s side screen returns to
another by operating the same procedures
again.
When selecting the “Wide”, “Side” or
“Top” key on the screen using the
INFINITI controller and pushing the
ENTER button, the view on the screen
will change to the one previously
selected *4 , *6 , *8 .
. Once you have changed the view on the
screen on the passenger’s side, the
view on the driver’s side will change to
the front view by shifting the selector
lever out of the R (Reverse) position *12 ,
*14 .
When the selector lever is moved to any
other position than the R (Reverse)
position while the rear-wide view *D
is displayed, another view that is set to
a higher priority will be displayed *16 .
4-34 Monitor, climate, audio, phone and voice recognition systems
Starting with the CAMERA button
operation
. When the CAMERA button is pushed *9
while another screen *A is displayed,
Around View Monitor operates and the
front view and bird-eye view *E are
displayed.
. The view on the screen on the passenger’s
side switches to the front-side
view *F when the CAMERA button is
pushed *10 . When the CAMERA button
is pushed again *17 , the screen *A is
displayed.
. When selecting the “Side” or “Top” key
on the screen using the INFINITI controller
and pushing the ENTER button,
the view on the screen will change to
the one previously selected *11 .
. The left screen switches to the rearview
*B , *C when the selector lever is
shifted into the R (Reverse) position
*13 , *15 and returns to the front view
*E , *F when the selector lever is
shifted out of the R (Reverse) position
*12 , *14 .
. Push another button on the control
panel to quit the Around View Monitor.
HOW TO SEE EACH VIEW
WARNING
. The distance guide line and the vehicle
width line should be used as a reference
only when the vehicle is on a paved,
level surface. The distance viewed on the
monitor is for reference only and may be
different than the actual distance between
the vehicle and displayed objects.
. Use the displayed lines and the bird-eye
view as a reference. The lines and the
bird-eye view are greatly affected by the
number of occupants, fuel level, vehicle
position, road condition and road grade.
. If the tires are replaced with different
sized tires, the predictive course line
and the bird-eye view may be displayed
incorrectly.
. When driving the vehicle up a hill,
objects viewed in the monitor are further
than they appear. When driving the
vehicle down a hill, objects viewed in
the monitor are closer than they appear.
Use the mirrors or actually look to
properly judge distances to other objects.