08.06.2013 Views

2013 Infiniti EX37 | Owner's Manual - Infiniti Owner Portal - Infiniti USA

2013 Infiniti EX37 | Owner's Manual - Infiniti Owner Portal - Infiniti USA

2013 Infiniti EX37 | Owner's Manual - Infiniti Owner Portal - Infiniti USA

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

AUTOMATIC MOONROOF<br />

The moonroof only operates when the<br />

ignition switch is in the ON position.<br />

The automatic moonroof is operational for<br />

about 45 seconds, even if the ignition<br />

switch is pushed to the OFF position. If the<br />

driver’s door or the passenger’s door is<br />

opened during this period of about 45<br />

seconds, power to the moonroof is canceled.<br />

SIC3243<br />

Sunshade<br />

The sunshade will open automatically<br />

when the moonroof is opened. However,<br />

it must be closed manually.<br />

Tilting the moonroof<br />

To tilt up, first close the moonroof, then<br />

push the UP *1 side of the moonroof<br />

switch and release it; it need not be held.<br />

To tilt down the moonroof, push the DOWN<br />

*2 side.<br />

Sliding the moonroof<br />

To fully open or close the moonroof, push<br />

the OPEN *2 or CLOSE *1 side of the<br />

moonroof switch and release it; it need not<br />

be held. The roof will automatically open or<br />

close all the way. To stop the roof, push the<br />

switch once more while it is opening or<br />

closing.<br />

Auto reverse function<br />

WARNING<br />

There are some small distances immediately<br />

before the closed position which cannot be<br />

detected. Make sure that all passengers<br />

have their hands, etc., inside the vehicle<br />

before closing the moonroof.<br />

If the control unit detects something<br />

caught in the moonroof when it is closing,<br />

the moonroof will be immediately opened.<br />

The auto reverse function can be activated<br />

when the moonroof is closed by automatic<br />

operation when the ignition switch is in the<br />

ON position or for about 45 seconds after<br />

the ignition switch is pushed to the OFF<br />

position.<br />

If the moonroof cannot be closed automatically<br />

when the auto reverse function<br />

activates due to a malfunction, push and<br />

hold the CLOSE *1 side of the moonroof<br />

Instruments and controls 2-55

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!