08.06.2013 Views

2013 Infiniti EX37 | Owner's Manual - Infiniti Owner Portal - Infiniti USA

2013 Infiniti EX37 | Owner's Manual - Infiniti Owner Portal - Infiniti USA

2013 Infiniti EX37 | Owner's Manual - Infiniti Owner Portal - Infiniti USA

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

. in heavy traffic or in traffic that varies in<br />

speed<br />

. on winding or hilly roads<br />

. on slippery roads (rain, snow, ice, etc.)<br />

. in very windy areas<br />

Doing so could cause a loss of vehicle<br />

control and result in an accident.<br />

SSD0600<br />

1. ACCELERATE/RESUME switch<br />

2. COAST/SET switch<br />

3. CANCEL switch<br />

4. MAIN (ON·OFF) switch<br />

CRUISE CONTROL OPERATIONS<br />

The cruise control allows driving at a speed<br />

between 25 to 89 MPH (40 to 144 km/h)<br />

without keeping your foot on the accelerator<br />

pedal.<br />

To turn on the cruise control, push the<br />

MAIN switch on. The CRUISE indicator will<br />

come on.<br />

To set cruising speed, accelerate your<br />

vehicle to the desired speed, push the<br />

COAST/SET switch and release it. (The<br />

CRUISE SET indicator will come on in the<br />

instrument panel.) Take your foot off the<br />

accelerator pedal. Your vehicle will maintain<br />

the set speed.<br />

. To pass another vehicle, depress the<br />

accelerator pedal. When you release<br />

the pedal, the vehicle will return to the<br />

previously set speed.<br />

. The vehicle may not maintain the set<br />

speed on winding or hilly roads. If this<br />

happens, drive without the cruise control.<br />

To cancel the preset speed, follow any of<br />

these methods:<br />

1. Push the CANCEL button. The SET<br />

indicator will go out.<br />

2. Tap the brake pedal. The SET indicator<br />

will go out.<br />

3. Move the selector lever to the N<br />

(Neutral) position. The SET indicator<br />

will go out.<br />

4. Turn the MAIN switch off. Both the<br />

CRUISE indicator and SET indicator will<br />

go out.<br />

. If you depress the brake pedal while<br />

pushing the ACCELERATE/RESUME or<br />

COAST/SET switch and reset at the<br />

Starting and driving 5-35

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!