2013 Infiniti EX37 | Owner's Manual - Infiniti Owner Portal - Infiniti USA

SAA3649
Models with navigation system
SAA3328
Models without navigation system
4-42 Monitor, climate, audio, phone and voice recognition systems
AROUND VIEW MONITOR SETTINGS
To set up the Around View Monitor to your
preferred settings, push the SETTING
button, select the “Camera” key and push
the ENTER button.
Predictive Course Lines:
When this item is turned on, the predictive
course line is displayed in the front and the
rearview.
Camera View Priority:
The view shown on the screen at the
beginning of around view monitor operation
can be selected in order of priority.
Color/Brightness Combination (models
without navigation system):
When this item is turned on, color and
brightness of the displayed screen is
adjusted.
Non-viewable Area Reminder (models with
navigation system)/Blind-Area Reminder
(models without navigation system):
When this item is turned on, the nonviewable
area is highlighted in yellow for 7
seconds after the bird-eye view is displayed.
Sonar Beep:
When this item is turned on, you will hear a
tone sound when the corner sonar indicator
appears.
Sonar Display:
When this item is turned on, the corner
sonar indicator is displayed in the frontside
view.
Corner Sonar Sensitivity:
Adjust the sensitivity level of the corner
sonar higher (right) or lower (left).
OPERATING TIPS
. The screen displayed on the Around
View Monitor will automatically return
to the previous screen 3 minutes after
the CAMERA button has been pushed
while the select lever is in a position
other than the R (Reverse) position.
. The display of images on the screen
may be delayed after screens are
switched. Objects in the Around View
Monitor may be distorted momentarily
until the Around View Monitor screen is
displayed completely.
. When the temperature is extremely high
or low, the screen may not display
objects clearly. This is not a malfunc-