08.06.2013 Views

2013 Infiniti EX37 | Owner's Manual - Infiniti Owner Portal - Infiniti USA

2013 Infiniti EX37 | Owner's Manual - Infiniti Owner Portal - Infiniti USA

2013 Infiniti EX37 | Owner's Manual - Infiniti Owner Portal - Infiniti USA

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

SPA1875<br />

Replace the battery as follows:<br />

1. Release the lock knob at the back of the<br />

Intelligent Key and remove the mechanical<br />

key.<br />

2. Insert a flat-blade screwdriver *A<br />

wrapped with a cloth into the slit *B<br />

of the corner and twist it to separate<br />

the upper part from the lower part.<br />

SDI2285<br />

3. Replace the battery with a new one.<br />

Recommended battery: CR2032 or<br />

equivalent.<br />

. Do not touch the internal circuit and<br />

electric terminals as it could cause a<br />

malfunction.<br />

. Hold the battery by the edges.<br />

Holding the battery across the contact<br />

points will seriously deplete the<br />

storage capacity.<br />

. Make sure that the + side faces the<br />

bottom of the case.<br />

4. Align the tips of the upper and lower<br />

parts, and then push them together<br />

until it is securely closed.<br />

5. Push the buttons two or three times to<br />

check its operation.<br />

See an INFINITI retailer if you need any<br />

assistance for replacement.<br />

FCC Notice:<br />

For <strong>USA</strong>:<br />

This device complies with Part 15 of the<br />

FCC Rules. Operation is subject to the<br />

following two conditions: (1) This device<br />

may not cause harmful interference, and<br />

(2) this device must accept any interference<br />

received, including interference that<br />

may cause undesired operation.<br />

NOTE:<br />

Changes or modifications not expressly<br />

approved by the party responsible for<br />

compliance could void the user’s authority<br />

to operate the equipment.<br />

For Canada:<br />

This device complies with RSS-210 of<br />

Industry Canada. Operation is subject to<br />

the following two conditions: (1) this<br />

device may not cause interference, and<br />

(2) this device must accept any interference,<br />

including interference that may<br />

cause undesired operation of the device.<br />

Maintenance and do-it-yourself 8-25

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!