08.06.2013 Views

2013 Infiniti EX37 | Owner's Manual - Infiniti Owner Portal - Infiniti USA

2013 Infiniti EX37 | Owner's Manual - Infiniti Owner Portal - Infiniti USA

2013 Infiniti EX37 | Owner's Manual - Infiniti Owner Portal - Infiniti USA

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Replacing wheels and tires<br />

When replacing a tire, use the same size,<br />

tread design, speed rating and load carrying<br />

capacity as originally equipped. (See<br />

“Specifications” in the “9. Technical and<br />

consumer information” section for recommended<br />

types and sizes of tires and<br />

wheels.)<br />

WARNING<br />

. The use of tires other than those<br />

recommended or the mixed use of tires<br />

of different brands, construction (bias,<br />

bias-belted or radial), or tread patterns<br />

can adversely affect the ride, braking,<br />

handling, ground clearance, body-to-tire<br />

clearance, tire chain clearance, speedometer<br />

calibration, headlight aim and<br />

bumper height. Some of these effects<br />

may lead to accidents and could result in<br />

serious personal injury.<br />

. For Two-Wheel Drive (2WD) models, if<br />

your vehicle was originally equipped<br />

with 4 tires that were the same size<br />

and you are only replacing 2 of the 4<br />

tires, install the new tires on the rear<br />

axle. Placing new tires on the front axle<br />

may cause loss of vehicle control in<br />

some driving conditions and cause an<br />

accident and personal injury.<br />

. If the wheels are changed for any<br />

reason, always replace with wheels<br />

which have the same off-set dimension.<br />

Wheels of a different off-set could cause<br />

premature tire wear, degrade vehicle<br />

handling characteristics and/or interference<br />

with the brake discs/drums. Such<br />

interference can lead to decreased braking<br />

efficiency and/or early brake pad/<br />

shoe wear. See “Wheels and tires” in the<br />

“9. Technical and consumer information”<br />

section of this manual for wheel off-set<br />

dimensions.<br />

. When a spare tire is mounted or a wheel<br />

is replaced, the TPMS will not function<br />

and the low tire pressure warning light<br />

will flash for approximately 1 minute.<br />

The light will remain on after 1 minute.<br />

Contact your INFINITI retailer as soon as<br />

possible for tire replacement and/or<br />

system resetting.<br />

. Replacing tires with those not originally<br />

specified by INFINITI could affect the<br />

proper operation of the TPMS.<br />

. Do not install a damaged or deformed<br />

wheel or tire even if it has been repaired.<br />

Such wheels or tires could have structural<br />

damage and could fail without<br />

warning.<br />

. The use of retread tire is not recommended.<br />

. For additional information regarding<br />

tires, refer to “Important Tire Safety<br />

Information” (US) or “Tire Safety Information”<br />

(Canada) in the Warranty Information<br />

Booklet.<br />

All-Wheel Drive (AWD) models<br />

CAUTION<br />

. Always use tires of the same type, size,<br />

brand, construction (bias, bias-belted or<br />

radial), and tread pattern on all four<br />

wheels. Failure to do so may result in a<br />

circumference difference between tires<br />

on the front and rear axles which will<br />

cause excessive tire wear and may<br />

damage the transmission, transfer case<br />

and differential gears.<br />

. ONLY use spare tires specified for the<br />

AWD model.<br />

Maintenance and do-it-yourself 8-39

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!