2013 Infiniti EX37 | Owner's Manual - Infiniti Owner Portal - Infiniti USA

WINDSHIELD WIPER BLADES
CLEANING
If your windshield is not clear after using
the windshield washer or if a wiper blade
chatters when running, wax or other
material may be on the blade or windshield.
Clean the outside of the windshield with a
washer solution or a mild detergent. Your
windshield is clean if beads do not form
when rinsing with clear water.
Clean each blade by wiping it with a cloth
soaked in a washer solution or a mild
detergent. Then rinse the blade with clear
water. If your windshield is still not clear
after cleaning the blades and using the
wiper, replace the blades.
Worn windshield wiper blades can damage
the windshield and impair driver vision.
8-20 Maintenance and do-it-yourself
REPLACING
Replace the wiper blades if they are worn.
1. Pull the wiper arm.
2. Push the release tab *A , and then
move the wiper blade down the wiper
arm *1 while pushing the release tab
to remove.
3. Insert the new wiper blade onto the
wiper arm until a click sounds.
4. Rotate the wiper blade so the dimple is
in the groove.
CAUTION
SDI2359
. After wiper blade replacement, return
the wiper arm to its original position;
otherwise it may be damaged when the
hood is opened.
. Make sure the wiper blades contact the
glass; otherwise the arm may be damaged
from wind pressure.