2013 Infiniti EX37 | Owner's Manual - Infiniti Owner Portal - Infiniti USA

PROGRAMMING HomeLink ®
If you have any questions or are having
difficulty programming your HomeLink ®
buttons, refer to the HomeLink ® web site
at: www.homelink.com or call 1-800-355-
3515.
NOTE:
It is also recommended that a new battery
be placed in the hand-held transmitter of
the device being programmed to
HomeLink ® for quicker programming and
accurate transmission of the radio-frequency.
1. Position the end of your hand-held
transmitter 1-3 in (26-76 mm) away
from the HomeLink ® surface, keeping
the HomeLink ® indicator light *1 in
view.
2-60 Instruments and controls
JVI0428X
2. Using both hands, simultaneously
press and hold the desired HomeLink ®
button and handheld transmitter button.
DO NOT release until the
HomeLink ®
indicator light *1 flashes
slowly and then rapidly. When the
indicator light flashes rapidly, both
buttons may be released. (The rapid
flashing indicates successful programming.)
NOTE:
Some devices to be programmed may
require you to replace Step 2 with the
cycling procedure noted in the “Programming
HomeLink ® for Canadian
customers and gate openers” later in
this section.