2013 Infiniti EX37 | Owner's Manual - Infiniti Owner Portal - Infiniti USA

inside temperature, air flow distribution
and fan speed after the preferred temperature
is set manually.
1. Push the “AUTO” button on. (The
indicator on the button will illuminate
and AUTO will be displayed.)
2. Turn the temperature control dial (driver
side) to set the desired temperature.
. The temperature can be set within
the following range.
— For U.S.: 60 to 908F
— For Canada: 18 to 328C
. The temperature of the passenger
compartment will be maintained
automatically. Air flow distribution
and fan speed will also be controlled
automatically.
3. You can individually set driver and front
passenger side temperature using each
temperature control button. When the
“DUAL” button is pushed or the passenger
side temperature control button
is turned, the DUAL indicator will come
on. To turn off the passenger side
temperature control, push the “DUAL”
button.
4-46 Monitor, climate, audio, phone and voice recognition systems
4. To turn off the climate control system,
push the “OFF” button.
A visible mist may be seen coming from the
ventilators in hot, humid conditions as the
air is cooled rapidly. This does not indicate
a malfunction.
Heating (A/C OFF):
The air conditioner does not activate in this
mode. When you need to heat only, use
this mode.
1. Push the “AUTO” button on.
2. Push the “A/C” button. (The A/C
indicator will turn off.)
3. Turn the temperature control dial to set
the desired temperature.
. The temperature of the passenger
compartment will be maintained automatically.
Air flow distribution and fan
speed are also controlled automatically.
. Do not set the temperature lower than
the outside air temperature. Otherwise
the system may not work properly.
. If the windows fog up, use dehumidified
heating instead of the A/C off heating.
Dehumidified defrosting or defogging:
1. Push the “ ” front defroster button.
(The indicator light on the button will
come on.)
2. Turn the temperature control dial to set
the desired temperature.
. To quickly remove ice from the outside
of the windows, push the fan speed
increase button “
maximum position.
” and set it to the
. As soon as possible after the windshield
is clean, push the “AUTO” button
to return to the auto mode.
. When the “ ” front defroster button
is pushed, the air conditioner will
automatically be turned on at outside
temperatures above 238F (−58C) to
defog the windshield, and the air
recirculate mode will automatically be
turned off. Outside air is drawn into the
passenger compartment to improve the
defogging performance.
Manual operation
Fan speed control:
Push the fan speed increase “ ” or
decrease “ ” buttons to manually control
the fan speed.