User Manual - Snap Studios

Recommendations

Info

J K L M N O On the rear of the grip, as well as the rear control wheel, there are a further three control buttons: AE-L button J This button can lock a light reading made in both automatic and manual exposure modes. It can also be used in Zone mode to take a new reading. Can be reassigned in Custom Settings to another function. See section on the AE-L button (chapter 8, Light Metering and Exposure Control) for full details. Film wind-off button K Pressing this button will automatically wind-off the remaining unexposed film rapidly without having to go through the normal film advance / expose cycles to reach the end of the film. The button has been purposely designed to avoid inadvertent pressing, so use the tip of a ball-point pen or similar to activate it. The grip LCD will display a message which you must confirm before this procedure is carried out. USER button L This button is purely user programmable to rapidly access a chosen function or screen. For example, you might use bracketing a great deal and so by one press of this button you could access the bracketing function without having to navigate through the menu. The AE-L, Mirror -UP and Stop Down buttons are also user-programmable but are by default assigned the functions according to their names The reassignable capability of these buttons is particularly useful and can save you a great deal of time and effort depending on how you work. You are advised to investigate their potential fully. See under ‘Custom settings’ for full details. On the front of the grip there are two more control buttons plus the remote cord release port: M.UP button M Press this button to raise the mirror and press again to lower it (toggle function). A quick double press of the button (two within a half second) will immediately access the ‘Self timer’ function. Can be reassigned in Custom Settings to another function. Remote release cord port N For attaching a remote release cord (electrical). The Hasselblad accessory jack plug socket is protected by a captive rubber plug. STOP DOWN button O Press this button to make a visual check of the depth-of-field on the viewfinder screen at the chosen aperture. The aperture will close according to the setting and remain closed as long as the pressure is maintained. You can alter the aperture at the same time to see the changes taking place. Can be reassigned in Custom Settings to another function. 20
P Q R There are also two control buttons on the viewfinder, as well as the eyesight correction adjustment wheel: Eyesight correction adjustment wheel P The personal eyesight adjustment facility has a diopter range of -4 – +2.5, to suit most users. EV correction adjustment button Q Press this button to access the EV compensation screen. Settings are made with either the front or rear control wheels. An EV correction symbol appears on the grip and viewfinder LCD as confirmation. EXP button R The EXP (Exposure) button accesses the exposure mode and metering method options screen. Settings are made with the front and rear control wheels and the appropriate symbols appear on the grip and viewfinder LCD accordingly. 21
Page 1 and 2: 1 User Manual (Manual (V1/English)
Page 3 and 4: Congratulations! Welcome to the fla
Page 5 and 6: What’s in the box Your new Hassel
Page 7 and 8: 1 Quick Start This section is a qui
Page 9 and 10: 13 14 15 16 17 18 19 20 21 22 B A 2
Page 11 and 12: 33 35 34 36 11 33. From the inactiv
Page 13 and 14: 2 Function Control & Display ■ LC
Page 15 and 16: Grip LCD Typical camera grip displa
Page 17 and 18: Viewfinder LCD Typical viewfinder d
Page 19: A B C D E I F G H Shutter release b
Page 23 and 24: 1 3 5 7 1 2 2 4 6 8 23 Carrying str
Page 25 and 26: 9 10 25 • Long-term storage of ba
Page 27 and 28: 4 Viewfinder ■ Multi-mode light m
Page 29 and 30: 5 Lenses ■ Rapid and accurate aut
Page 31 and 32: 10 11 12 7 8 9 Lens focus setting t
Page 33 and 34: 6 Film Magazines ■ Automatic 120/
Page 35 and 36: G H I K L J 35 a time-out of five s
Page 37 and 38: A B 1 2 3 4 5 Film speed Film lengt
Page 39 and 40: 1 2 4 3 5 1 1 2 2 39 Film loading T
Page 41 and 42: 41 Hasselblad provides a number of
Page 43 and 44: Approval Architecture (IAA), an enh
Page 45 and 46: Average (45 x 37 mm) ≈ 70% Centre
Page 47 and 48: 4 1 EXP 2 3 47 A ‘+ 0.3’ abo
Page 49 and 50: 1 3 5 A B +/- 2 4 49 Alternativ
Page 51 and 52: Power The camera can be set at two
Page 53 and 54: 1 AF 2 3 53 Continuous At Contin
Page 55 and 56: 1 2 3 4 5 ON.OFF (PROFILES/
Page 57 and 58: 10 Advanced Features ■ Programmab
Page 59 and 60: There are a number of more advanced
Page 61 and 62: 2 Bracketing 61 Bracketing options
Page 63 and 64: 1 2 3 4 5 6 Number of exposures hig
Page 65 and 66: Standby timeout 1 • 5s • 10s
Page 67 and 68: AE lock / Quick adjust 22 • Exp r
Page 69 and 70: 1 2 5 6 7 3 4 69 Image
Page 71 and 72:
2 4 5 AF Sel. 1 2 3 4 5 6 7 3
Page 73 and 74:
1 3 5 7 2 4 6 73 4.4 Syst
Page 75 and 76:
The H2 can be used together with mo
Page 77 and 78:
1 3 5 FLASH AE-L 2 4 6 77 Sepa
Page 79 and 80:
There are a number of optional acce
Page 81 and 82:
Glossary of Terms For the sake of c
Page 83 and 84:
True exposure Shutter position Open
Page 85 and 86:
Technical specifications Camera Typ
Page 87 and 88:
External dimensions approx. 155 mm
Page 89 and 90:
Problems, Equipment Care, Service &
Page 91:
Victor Hasselblad AB Box 220, SE -
show all

User Manual - Snap Studios

Create successful ePaper yourself

Delete template?

Save as template?