User Manual - Snap Studios
User Manual - Snap Studios
User Manual - Snap Studios
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1 2<br />
<br />
3 4<br />
<br />
<br />
5 6<br />
‘Delay’ highlighted with drop<br />
shadow. 10 seconds chosen.<br />
7 8<br />
9 10<br />
11 12<br />
<br />
<br />
Mirror down /up highlighted.<br />
‘Mirror down after exposure’<br />
chosen as option.<br />
<br />
<br />
ON.OFF<br />
(PROFILES/ESC)<br />
<br />
<br />
Mirror sequence highlighted.<br />
‘Delay first, then mirror raised’<br />
chosen as option.<br />
AF<br />
On<br />
<br />
<br />
<br />
60<br />
Self timer setting<br />
The Self timer function is set in the following manner:<br />
1) Press the MENU button on the grip.<br />
2) Turn the front control wheel until Self Timer appears.<br />
3) Press ENTER (DRIVE button) on the grip.<br />
4) Turn the front control wheel to access the options, that are:<br />
Delay<br />
Mirror sequence<br />
Mirror Up / Mirror Goes Down<br />
(A drop shadow will be displayed beneath the selected symbol,<br />
for example )<br />
5) When Delay is highlighted - - turn the rear control wheel<br />
to choose a delay range from 2 - 60s in 1s intervals.<br />
6) Turn the front control wheel again to choose Delay / Mirror<br />
Up, Mirror Up/ Delay sequence - . When highlighted<br />
turn the rear control wheel to choose.<br />
Delay / Mirror Up sequence =<br />
Delay for set amount of time — mirror raised — exposure made.<br />
Mirror Up/ Delay sequence =<br />
Mirror raised — delay for set amount of time — exposure made.<br />
7) Turn the front control wheel again for<br />
Mirror goes down / Mirror remains up - . - choice.<br />
Turn the rear control wheel to choose.<br />
Mirror goes down =<br />
Mirror returns to its normal position and the next film frame<br />
is advanced.<br />
Mirror raised =<br />
Mirror remains in raised position. No image is visible in the<br />
viewfinder until M UP button pressed.<br />
8) Press On (AF button). Note that this now reads Off and the<br />
line of text at the bottom of the screen reads ‘Self timer on’.<br />
9) Press SAVE (DRIVE button) to save the setting.<br />
10) Press ENTER (DRIVE button) again from the Self Timer<br />
screen to activate the function.<br />
11) Click On (AF button).<br />
12) Half-press the shutter release button to standby mode for this<br />
function (press the shutter release button again (full press)<br />
for activation) or full-press the shutter release for immediate<br />
activation.<br />
Check the lower text-row on the screen for ON or OFF status.<br />
You can halt the sequence by clicking the ON / OFF ( ESC ) button.