Flowgraph View - Kodak

Flowgraph View Basics
Sample Recipes in Flowgraph View
Creating a Look for a Commercial
This sample recipe creates a look for a commercial — the Input Roll/Image
Node, Negative Node and Color Corrector Node.
In this example, the creator performed the following adjustments:
From the Input Roll/Image Node:
On the Image Controller tab, select an image to be used in the recipe.
From the Negative Node:
1. On the Films tab, select the film stock to be emulated.
2. Double-click the blue output button to open the original image in the
ImageViewer.
From the Color Corrector Node, make the necessary color corrections:
1. Click Quick Preview to immediately view a low-resolution image of the
color corrections.
2. Desaturate the image by setting the Saturation to 25%.
3. Add cyan/blue to the Lift and Gamma, then push yellow into the Gain.
4. Increase lamp intensity to 20 to compensate for the density that was
added when the colors were added.
5. Add intensity to the Gain (to 54) to blow out the highlights a little, then also
add intensity to the Gamma (to 53) to bring up some detail in the
midrange.
6. Click Update to view a high-resolution image with the color corrections.
100 KODAK Look Manager System User Guide V2.2