Flowgraph View - Kodak

Emulation Nodes in Flowgraph View
To use the Master Positive/Dupe Negative Node - Films Tab:
1. From the Master Positive or Dupe Negative node options window, click
the Films tab.
2. (Optional) Click Quick Preview to open a Quick Preview window.
Use this window to immediately view the effects of the selections that you
make. However, this is a low-resolution image and should not be used to
make critical color decisions. Use the ImageViewer for critical color
decisions.
3. Click the film stock and the process that you want to emulate.
4. If desired, use the slider bar to select a Skip Bleach percentage.
5. Click Update to update the image in the ImageViewer.
6. Continue to adjust node options and update the ImageViewer until you
achieve the desired look.
7. If necessary, click Reset All to reset all of the tabs to the default values.
Master Positive/Dupe Negative Nodes - Flashing Tab
Use the Master Positive/Dupe Negative - Flashing tab to select Flashing
Filters and set their values.
NOTE
You can also apply flashing during the Negative and Print Emulation processes.
150 KODAK Look Manager System User Guide V2.2